Worked example
Example: 2/40s Ne, 2 % contraction. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Counts entered in | Ne (English cotton) |
| Yarn 1 count | 40.000 - |
| Yarn 2 count | 40.000 - |
| Yarn 3 count (0 = none) | 0 - |
| Twist contraction on plying | 2.0000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Resultant linear density | 30.130 tex |
| Resultant Ne | 19.600 |
Open this example in the calculator and change any input.
Formula
\(T_R = \frac{\sum T_i}{1 - c_t}, \quad Ne_R = \frac{590.54}{T_R}, \quad 590.54 = \frac{453.59237\ \mathrm{g}}{840 \times 0.9144\ \mathrm{m}} \times 1000\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\text{system}\) | Counts entered in | - |
| \(N_1\) | Yarn 1 count | - |
| \(N_2\) | Yarn 2 count | - |
| \(N_3\) | Yarn 3 count (0 = none) | - |
| \(c_t\) | Twist contraction on plying | - |
| \(T_R\) | Resultant tex (g per km) | - |
| \(Ne_R\) | Resultant Ne | - |
Method and standards
Linear density definitions.
Where it is used
- Yarn specification and costing.
Common mistakes
- Adding Ne counts directly.
- Ignoring contraction.
Assumptions and limits
- Contraction as a length share.
- Yarn 3 is either 0 (none) or a real count of at least 0.5.
- Tex is shown as a plain number in g/km.
References
- Definitions and mass and energy balances: tex adds directly; Ne combines as 1/ΣNe⁻¹; plying twist shortens the yarn
Questions and answers
What is 2/40s?
Two 40s Ne singles plied: about 20s Ne resultant before contraction.
Why does contraction raise the tex?
Plying twist shortens the yarn, so the same mass occupies less length.
Can I mix counts?
Yes; tex simply adds.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.