Worked example
Example: 10 t from 24 % to 14 %. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Wet paddy | 10,000 kg |
| Harvest moisture (wet basis) | 24.000 % |
| Storage moisture (wet basis) | 14.000 % |
| Heat per kg of water removed | 5.0000 MJ/kg |
| Fuel (husk) heating value | 14.000 MJ/kg |
Applying the formula below gives:
| Result | Value |
|---|---|
| Dried paddy | 8,837.2 kg |
| Water removed | 1,162.8 kg |
| Heat | 5.8140 GJ |
| Fuel | 415.28 kg |
Open this example in the calculator and change any input.
Formula
\(M_2 = M\frac{1 - w_1}{1 - w_2}, \quad M_w = M - M_2, \quad Q = M_w q, \quad M_f = \frac{Q}{LHV}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(M\) | Wet paddy | kg |
| \(w_1\) | Harvest moisture (wet basis) | - |
| \(w_2\) | Storage moisture (wet basis) | - |
| \(q\) | Heat per kg of water removed | J/kg |
| \(LHV\) | Fuel (husk) heating value | J/kg |
| \(M_2\) | Dried paddy | kg |
| \(M_w\) | Water removed | kg |
| \(Q\) | Heat | J |
| \(M_f\) | Fuel | kg |
Method and standards
Dry matter balance.
Where it is used
- Rice mill dryer sizing.
- Procurement shrink allowances.
Common mistakes
- Subtracting moisture percentages directly.
- Mixing wet and dry basis.
Assumptions and limits
- No dry matter loss.
- The heat per kg of water removed is the user's figure; the default 5 MJ/kg is a typical value, not from a cited source.
References
- Definitions and mass and energy balances: dry matter balance on wet-basis moisture
Questions and answers
Why does weight drop more than the moisture points suggest?
Wet-basis moisture is per kg of wet grain: 24 % to 14 % removes 11.6 % of the mass.
What heat use is typical?
4–6 MJ per kg of water in batch and recirculating dryers.
Why not dry fast?
Rapid drying cracks kernels and cuts head rice yield.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.