FireCADCalc

Oilseed Oil Yield: Expeller and Solvent Extraction

Oil recovered and meal produced from oilseed, its oil content, and the residual oil left in cake or meal, on a consistent moisture basis.

Food, dairy and textile

Inputs

Examples: Soybean 19 %, meal 0.8 %Expeller groundnut 45 %, cake 7 %

Results

Expellers leave 5–8 % oil in cake; solvent extraction brings meal below 1 %.

Oil recovered91.734t/d
Meal or cake408.27t/d
Oil recovery (share of oil in seed)96.562%
Oil yield on seed18.347%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Soybean 19 %, meal 0.8 %. The inputs, in the units selected above:

InputValue
Seed processed500.00 t/d
Oil in the seed19.000 %
Residual oil in the meal or cake0.80000 %
Hulls and losses removed before extraction0 %

Applying the formula below gives:

ResultValue
Oil recovered91.734 t/d
Meal or cake408.27 t/d
Oil recovery (share of oil in seed)96.562 %
Oil yield on seed18.347 %

Open this example in the calculator and change any input.

Formula

\(\dot M_m = \frac{\dot M(1 - h_s) - \dot Mo_s}{1 - o_m}, \quad \dot M_o = \dot Mo_s - \dot M_mo_m\)

Variables

Symbol Meaning SI unit
\(\dot M\) Seed processed kg/s
\(o_s\) Oil in the seed -
\(o_m\) Residual oil in the meal or cake -
\(h_s\) Hulls and losses removed before extraction -
\(\dot M_o\) Oil recovered kg/s
\(\dot M_m\) Meal or cake kg/s
\(\eta\) Oil recovery (share of oil in seed) -
\(Y\) Oil yield on seed -

Method and standards

Oil and solids balance.

Where it is used

  • Plant yield accounting.

Common mistakes

  • Mixing moisture bases.
  • Counting solvent in the oil.

Assumptions and limits

  • Consistent moisture basis; hulls oil-free.
  • Hulls removed plus seed oil must be below 100 %. With no seed the recovery and yield are not shown.

References

  • Definitions and mass and energy balances: oil and oil-free solids balance (hulls assumed oil-free)

Questions and answers

Why does residual oil matter so much?

Each percent left in meal is oil sold at meal price.

Solvent or expeller?

Low-oil seeds (soy, rice bran) go to solvent extraction; high-oil seeds are pre-pressed then extracted.

Are hulls oil-free?

Nearly; the calculator assumes so.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.