Worked example
Example: Soybean 19 %, meal 0.8 %. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Seed processed | 500.00 t/d |
| Oil in the seed | 19.000 % |
| Residual oil in the meal or cake | 0.80000 % |
| Hulls and losses removed before extraction | 0 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Oil recovered | 91.734 t/d |
| Meal or cake | 408.27 t/d |
| Oil recovery (share of oil in seed) | 96.562 % |
| Oil yield on seed | 18.347 % |
Open this example in the calculator and change any input.
Formula
\(\dot M_m = \frac{\dot M(1 - h_s) - \dot Mo_s}{1 - o_m}, \quad \dot M_o = \dot Mo_s - \dot M_mo_m\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot M\) | Seed processed | kg/s |
| \(o_s\) | Oil in the seed | - |
| \(o_m\) | Residual oil in the meal or cake | - |
| \(h_s\) | Hulls and losses removed before extraction | - |
| \(\dot M_o\) | Oil recovered | kg/s |
| \(\dot M_m\) | Meal or cake | kg/s |
| \(\eta\) | Oil recovery (share of oil in seed) | - |
| \(Y\) | Oil yield on seed | - |
Method and standards
Oil and solids balance.
Where it is used
- Plant yield accounting.
Common mistakes
- Mixing moisture bases.
- Counting solvent in the oil.
Assumptions and limits
- Consistent moisture basis; hulls oil-free.
- Hulls removed plus seed oil must be below 100 %. With no seed the recovery and yield are not shown.
References
- Definitions and mass and energy balances: oil and oil-free solids balance (hulls assumed oil-free)
Questions and answers
Why does residual oil matter so much?
Each percent left in meal is oil sold at meal price.
Solvent or expeller?
Low-oil seeds (soy, rice bran) go to solvent extraction; high-oil seeds are pre-pressed then extracted.
Are hulls oil-free?
Nearly; the calculator assumes so.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.