Worked example
Example: 85 % conversion with a by-product. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Reactant A fed | 0.10000 kmol |
| Reactant A leaving (unreacted) | 0.015000 kmol |
| Wanted product formed | 0.070000 kmol |
| By-product formed | 0.015000 kmol |
| Moles of A per mole of P | 1.0000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Conversion of A | 85.000 % |
| Yield of P on A fed | 70.000 % |
| Fractional selectivity (on A reacted) | 82.353 % |
| Selectivity P over D (moles) | 4.6667 |
Open this example in the calculator and change any input.
Formula
\(X = \frac{n_{A0} - n_A}{n_{A0}}, \quad Y = \frac{\nu n_P}{n_{A0}}, \quad S_f = \frac{\nu n_P}{n_{A0} - n_A}, \quad S_{P/D} = \frac{n_P}{n_D}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(n_{A0}\) | Reactant A fed | mol |
| \(n_A\) | Reactant A leaving (unreacted) | mol |
| \(n_P\) | Wanted product formed | mol |
| \(n_D\) | By-product formed | mol |
| \(\nu\) | Moles of A per mole of P | - |
| \(X\) | Conversion of A | - |
| \(Y\) | Yield of P on A fed | - |
| \(S_f\) | Fractional selectivity (on A reacted) | - |
| \(S_{P/D}\) | Selectivity P over D (moles) | - |
Method and standards
Definitions.
Where it is used
- Reactor performance tests.
- Process economics.
Common mistakes
- Mixing yield definitions.
- Ignoring stoichiometric ratio ν.
Assumptions and limits
- Single key reactant.
- Product formed that would need more A than has reacted is rejected, so the yield never exceeds the conversion.
References
- Definitions of conversion
- yield and selectivity (Fogler, Elements of Chemical Reaction Engineering)
Questions and answers
100 fed, 15 left, 70 product, 15 by-product?
Conversion 85 %, yield 70 %, fractional selectivity 82 %, P/D 4.7.
Why do definitions differ?
Texts define yield on A fed or A reacted; this page shows both.
Recycle?
With recycle, overall conversion exceeds single-pass conversion.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.