FireCADCalc

Exposure to Mixed Vapours: TWA, Mixture TLV and Exposure Index

Eight-hour time-weighted average from up to three exposure periods, and the exposure index ΣC/TLV of a mixture of up to three substances with additive effects.

Process steam and utilitiesDistillery and ethanolRefinery and petrochemicalChemical and fertiliser

Inputs

Examples: 100 ppm 4 h + 50 ppm 2 h; A 100/200 + B 50/100Three periods; three-solvent mixture

Results

The TWA divides by 8 hours whatever the total time entered (time not entered counts as zero exposure). The mixture rule assumes the substances act on the same organ (additive effects).

A screening estimate for training and early design, not a hazard or risk study.

Eight-hour time-weighted average (same unit as C)62.500
Exposure index of the mixture1.0000
TLV of the mixture as sampled (same unit)150.00

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 100 ppm 4 h + 50 ppm 2 h; A 100/200 + B 50/100. The inputs, in the units selected above:

InputValue
Concentration in period 1100.00 -
Duration of period 14.0000 h
Concentration in period 250.000 -
Duration of period 22.0000 h
Concentration in period 30 -
Duration of period 32.0000 h
Mixture: concentration of substance A100.00 -
TLV of substance A200.00 -
Mixture: concentration of substance B50.000 -
TLV of substance B100.00 -
Mixture: concentration of substance C (0 = none)0 -
TLV of substance C100.00 -

Applying the formula below gives:

ResultValue
Eight-hour time-weighted average (same unit as C)62.500
Exposure index of the mixture1.0000
TLV of the mixture as sampled (same unit)150.00

Open this example in the calculator and change any input.

Formula

\(TWA = \frac{C_1t_1 + C_2t_2 + \dots}{8\ \text{h}}, \quad EI = \sum\frac{C_i}{TLV_i}, \quad TLV_{mix} = \frac{\sum C_i}{EI}\)

Variables

Symbol Meaning SI unit
\(C_1\) Concentration in period 1 -
\(t_1\) Duration of period 1 s
\(C_2\) Concentration in period 2 -
\(t_2\) Duration of period 2 s
\(C_3\) Concentration in period 3 -
\(t_3\) Duration of period 3 s
\(C_A\) Mixture: concentration of substance A -
\(TLV_A\) TLV of substance A -
\(C_B\) Mixture: concentration of substance B -
\(TLV_B\) TLV of substance B -
\(C_C\) Mixture: concentration of substance C (0 = none) -
\(TLV_C\) TLV of substance C -
\(TWA\) Eight-hour time-weighted average (same unit as C) -
\(\sum C_i/TLV_i\) Exposure index of the mixture -
\(TLV_{mix}\) TLV of the mixture as sampled (same unit) -

Method and standards

Time weighting and the additive mixture rule.

Where it is used

  • Industrial hygiene checks for solvent use.
  • Ventilation targets.

Common mistakes

  • Dividing by the actual sampling time.
  • Adding non-additive substances.

Assumptions and limits

  • Additive effects; 8-hour shift.

References

  • Crowl and Louvar
  • Chemical Process Safety: Fundamentals with Applications
  • 2nd ed. (Prentice Hall, 2002)
  • ch. 3
  • eqs. 3-1 to 3-3 (TLV-TWA and mixtures)

Questions and answers

What unit should I use?

Any concentration unit, as long as the TLVs are in the same unit (usually ppm or mg/m³).

When is the mixture rule not valid?

When the substances act on different organs; then each is compared with its own limit separately.

What do the defaults represent?

100 ppm for 4 h and 50 ppm for 2 h; a mixture of 100 ppm of A (TLV 200) and 50 ppm of B (TLV 100).

Method and article reviewed by FireCAD engineering on 17 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.