Worked example
Example: 100 bbl/d test at 1,800 of 2,400 psia. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Average reservoir pressure | 2,400.0 psi |
| Bottom-hole pressure on test | 1,800.0 psi |
| Oil rate on test | 100.00 bbl/d |
| Bottom-hole pressure of interest | 800.00 psi |
Applying the formula below gives:
| Result | Value |
|---|---|
| Maximum rate (absolute open flow) | 250.00 bbl/d |
| Oil rate at p_wf | 211.11 bbl/d |
| Productivity at p_wf (rate per drawdown) | 3.5214e-11 |
Open this example in the calculator and change any input.
Formula
\(\frac{q_o}{q_{max}} = 1 - 0.2\frac{p_{wf}}{\bar p_r} - 0.8\left(\frac{p_{wf}}{\bar p_r}\right)^2\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\bar p_r\) | Average reservoir pressure | Pa |
| \(p_{wf,t}\) | Bottom-hole pressure on test | Pa |
| \(q_t\) | Oil rate on test | m³/s |
| \(p_{wf}\) | Bottom-hole pressure of interest | Pa |
| \(q_{max}\) | Maximum rate (absolute open flow) | m³/s |
| \(q_o\) | Oil rate at p_wf | m³/s |
| \(J^*\) | Productivity at p_wf (rate per drawdown) | - |
Method and standards
Vogel's dimensionless IPR.
Where it is used
- Artificial lift and choke sizing.
- Production forecasting.
Common mistakes
- Using it above the bubble point.
- Using a test at a different reservoir pressure.
Assumptions and limits
- Saturated reservoir; zero skin.
References
- Ahmed
- Reservoir Engineering Handbook
- 5th ed. (Gulf Professional Publishing, 2019)
- ch. 7
- eq. 7-9 (Vogel, 1968)
Questions and answers
Why is the IPR curved?
As bottom-hole pressure falls below the bubble point, gas comes out of solution and reduces the oil's mobility near the well.
What is AOF?
Absolute open flow: the theoretical rate at zero bottom-hole pressure, a measure of well capacity.
What do the defaults represent?
A well tested at 100 bbl/d with 1,800 psia flowing pressure in a 2,400 psia reservoir; rate at 800 psia.
Method and article reviewed by FireCAD engineering on 17 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.