FireCADCalc

Gas Hydrate Formation Temperature (Towler–Mokhatab)

Temperature below which natural gas forms hydrates at a pressure, from its gravity (Towler–Mokhatab fit of the Katz chart), and the margin to the line.

Thermal power plantProcess steam and utilitiesRefinery and petrochemicalChemical and fertiliserFuel oil and gas system

Inputs

Examples: Mokhatab Example 3-2 (59.1 °F), line at 40 °F1,000 psia, 0.6 gas, line at 70 °F3,000 psia rich gas

Results

A fit of the Katz gravity chart for sweet natural gas; with much CO₂ or H₂S use a sour-gas method. Free water must be present for hydrates to form.

Hydrate formation temperature16.168°C
Cooling below the hydrate point (positive = hydrates form)-4.9433K

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Mokhatab Example 3-2 (59.1 °F), line at 40 °F. The inputs, in the units selected above:

InputValue
Gas pressure (absolute)661.37 psi
Gas specific gravity (air = 1)0.70900 -
Lowest line temperature4.4444 °C

Applying the formula below gives:

ResultValue
Hydrate formation temperature15.047 °C
Cooling below the hydrate point (positive = hydrates form)10.602 K

Open this example in the calculator and change any input.

Formula

\(T_h = 13.47\ln P + 34.27\ln SG - 1.675\ln P\ln SG - 20.35\ (\text{°F, psia})\)

Variables

Symbol Meaning SI unit
\(P\) Gas pressure (absolute) Pa
\(SG\) Gas specific gravity (air = 1) -
\(T_l\) Lowest line temperature K
\(T_h\) Hydrate formation temperature K
\(T_h - T_l\) Cooling below the hydrate point (positive = hydrates form) K

Method and standards

Towler–Mokhatab correlation.

Where it is used

  • Flowline and pipeline flow assurance.
  • Choke and letdown station design.

Common mistakes

  • Applying it to gas without free water.
  • Ignoring the Joule–Thomson cooling across chokes.

Assumptions and limits

  • Sweet natural gas; Katz chart accuracy.

References

  • Mokhatab
  • Poe and Speight
  • Handbook of Natural Gas Transmission and Processing (Gulf Professional Publishing, 2006)
  • ch. 3
  • eq. 3-53 (Towler and Mokhatab, 2005)
  • Example 3-2

Questions and answers

Why do hydrates matter?

Ice-like solids of water and light gas form well above 0 °C at pipeline pressures and can block lines, valves and meters.

How accurate is the correlation?

It reproduces the Katz chart; in Mokhatab's Example 3-2 it gives 59.1 °F against 57.6 °F measured for a sour gas.

What do the defaults represent?

Mokhatab's Example 3-2: gravity 0.709 at 661.37 psia (59.1 °F), against a 40 °F line.

Method and article reviewed by FireCAD engineering on 17 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.