Worked example
Example: Hugot example 2: 5 L/s juice, 40 mm. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Flow | 5.0000 L/s |
| Pipe inside diameter | 40.000 mm |
| Pipe length | 20.000 m |
| Kinematic viscosity of the pure solution | 1.1000e-06 m²/s |
| Purity | 100.00 % |
| Density | 1,080.0 kg/m³ |
| Pipe | Smooth |
Applying the formula below gives:
| Result | Value |
|---|---|
| Kinematic viscosity of the product | 1.1000e-06 m²/s |
| Velocity | 3.9789 m/s |
| Reynolds number | 144,686 |
| Friction factor | 0.016424 |
| Head loss per metre | 0.33143 |
| Head loss | 6.6287 m |
| Pressure drop | 70.205 kPa |
Open this example in the calculator and change any input.
Formula
\(U = \frac{4Q}{\pi D^2}, \quad R = \frac{UD}{\nu}, \quad \lambda = \frac{64}{R}\ (R < 2320), \quad \lambda = \frac{1}{\sqrt[4]{100R}}\ (R < 10^5), \quad \lambda = 0.0032 + \frac{0.221}{R^{0.237}}\)
\(\lambda = 0.01\left(\frac{A}{D}\right)^{0.314}\ (\text{rough pipes},\ R > 10^5), \quad j = \frac{\lambda}{D}\frac{U^2}{2g}\)
\(\nu = \frac{\nu_0}{p}\ (\text{impure solution, Hugot eqn 45.9})\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(Q\) | Flow | m³/s |
| \(D\) | Pipe inside diameter | m |
| \(L\) | Pipe length | m |
| \(\nu_0\) | Kinematic viscosity of the pure solution | m²/s |
| \(p\) | Purity | - |
| \(\rho\) | Density | kg/m³ |
| \(\text{pipe}\) | Pipe | - |
| \(\nu\) | Kinematic viscosity of the product | m²/s |
| \(U\) | Velocity | m/s |
| \(R\) | Reynolds number | - |
| \(\lambda\) | Friction factor | - |
| \(j\) | Head loss per metre | - |
| \(J\) | Head loss | m |
| \(\Delta p\) | Pressure drop | Pa |
Method and standards
Hugot's flow formulae.
Where it is used
- Sizing juice, syrup and molasses lines.
- Checking pump heads.
Common mistakes
- Using pure-sucrose viscosity for molasses.
- Ignoring temperature effects on viscosity.
Assumptions and limits
- Newtonian flow; massecuites are not Newtonian.
- Rough pipes: Hugot's rough law (45.13) holds at very high Reynolds numbers (10⁵–10⁶, by roughness). Below 10⁵ the page uses the smooth law and shows the rough value in a note; the true value lies between them.
- A is Hugot's roughness coefficient "having the dimension of length" (1.5, 2.5 and 5 m as printed), not a physical roughness height.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 45
- eqns 45.1–45.13 and Table 45.2
- pp. 1115–1123
Questions and answers
Why divide viscosity by purity?
Hugot's rough rule: impurities raise viscosity; a juice of 85 purity is about 1/0.85 times as viscous as pure sucrose solution.
Which friction law?
Laminar 64/R; smooth pipes Hugot's two turbulent laws; rough pipes at high R his (A/D)^0.314 law.
Hugot's example?
5 L/s of juice in a 40 mm pipe: 3.98 m/s, R = 144 690, λ = 0.0164, 0.33 m head per metre.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.