FireCADCalc

Rotary Pump for Massecuite and Molasses (Hugot)

Output of a rotary (Rota-type) pump for massecuite or molasses from its body, rotor, width and speed (Hugot eqn 44.2) and the motor power (44.3).

Sugar mill and cogenerationPump

Inputs

Examples: Massecuite pump 40 rpmMolasses pump 130 rpm

Hugot: molasses 120–150 rpm; massecuite 30–60 rpm.
Hugot: molasses 0.70–0.85; massecuite 0.60–0.75.

Results

Enter the friction head of the viscous product in H + h: it is often the larger part of the head for massecuite.

Hugot writes the power with 100 in place of 102 (g × 1000/100 rounding). These pumps lift 2–3 m and deliver to 20–30 m.

Output36.301m³/h
Motor input power5.9012kW

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Massecuite pump 40 rpm. The inputs, in the units selected above:

InputValue
Body diameter0.40000 m
Rotor section0.060000 m²
Barrel width0.30000 m
Rotor speed40.000 rpm
Volumetric efficiency65.000 %
Density of the product1,480.0 kg/m³
Total head with losses20.000 m
Pump efficiency65.000 %
Reducer and transmission efficiency92.000 %
Motor efficiency85.000 %

Applying the formula below gives:

ResultValue
Output30.731 m³/h
Motor input power4.8748 kW

Open this example in the calculator and change any input.

Formula

\(Q = \left(\frac{\pi D^2}{4} - s\right)L\,n\,\rho_v, \quad P = \frac{Q\,d\,g(H + h)}{\rho_m\rho_r\rho_M}\)

Variables

Symbol Meaning SI unit
\(D\) Body diameter m
\(s\) Rotor section m²
\(L\) Barrel width m
\(n\) Rotor speed 1/s
\(\rho_v\) Volumetric efficiency -
\(d\) Density of the product kg/m³
\(H + h\) Total head with losses m
\(\rho_m\) Pump efficiency -
\(\rho_r\) Reducer and transmission efficiency -
\(\rho_M\) Motor efficiency -
\(Q\) Output m³/s
\(P\) Motor input power W

Method and standards

Hugot's displacement and power.

Where it is used

  • Selecting massecuite and molasses pumps.
  • Checking motor sizes.

Common mistakes

  • Using the body volume without the rotor.
  • Neglecting the large friction head of viscous products.

Assumptions and limits

  • Positive-displacement pump; head includes pipe losses, which the user must find for the viscous product.
  • The rotor speed is compared with Hugot's overall ranges (30–150 rpm); check it against the range for the product.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 44
  • rotary pumps
  • eqns 44.2–44.3
  • pp. 1108–1112

Questions and answers

Why rotary pumps for massecuite?

They move viscous massecuite slowly without crushing crystals.

Why so slow?

Viscous products fill the chambers only at low speed; massecuite pumps run at 30–60 rpm.

Reducer efficiency?

0.90–0.95 for two-stage gearing, only 0.50–0.60 with a worm.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.