FireCADCalc

Distillery Water Balance (ZLD): Fresh Water per kL

Fresh water per kilolitre of alcohol and per day from the water uses per kilolitre and the condensate recycled, and the recycle share.

Distillery and ethanol

Inputs

Examples: 100 KLPDHigh recycle

Results

More condensate than water use: the excess must be stored or treated.

Total water use per kL10.000
Fresh water per kL0
Fresh water per day0m³/d
Recycle share100.00%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 100 KLPD. The inputs, in the units selected above:

InputValue
Plant capacity (absolute alcohol)100.00 kL/d
Dilution (process) water per kL6.0000 -
Cooling-tower make-up per kL5.0000 -
Boiler and utility make-up per kL1.5000 -
Condensate recycled per kL6.5000 -

Applying the formula below gives:

ResultValue
Total water use per kL12.500
Fresh water per kL6.0000
Fresh water per day600.00 m³/d
Recycle share52.000 %

Open this example in the calculator and change any input.

Formula

\(w_t = w_d + w_c + w_b, \quad w_f = \max(0, w_t - w_r), \quad \dot V_f = \dot V_e w_f\)

Variables

Symbol Meaning SI unit
\(\dot V_e\) Plant capacity (absolute alcohol) m³/s
\(w_d\) Dilution (process) water per kL -
\(w_c\) Cooling-tower make-up per kL -
\(w_b\) Boiler and utility make-up per kL -
\(w_r\) Condensate recycled per kL -
\(w_t\) Total water use per kL -
\(w_f\) Fresh water per kL -
\(\dot V_f\) Fresh water per day m³/s
\(w_r/w_t\) Recycle share -

Method and standards

Water balance.

Where it is used

  • Consent compliance.
  • Water audits.

Common mistakes

  • Gross condensate counted before polishing reject.

Assumptions and limits

  • Steady operation.

References

  • Water balance per kL of alcohol (m³ per kL)

Questions and answers

What do consents ask for?

Specific fresh water use per kL of alcohol, with a ZLD condition for many plants.

Biggest saving?

Recycling polished evaporator and process condensate into dilution and cooling make-up.

Units?

m³ of water per kL of alcohol, which is the same as L per L.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.