FireCADCalc

Spent Wash Pollution Load: COD, BOD and Solids

Daily COD, BOD and total solids load of spent wash from its flow and concentrations, and the load per kilolitre of alcohol.

Distillery and ethanol

Inputs

Examples: 1000 m3/dConcentrated

Results

COD load110.00t/d
BOD load50.000t/d
Solids load120.00t/d
COD per volume of alcohol (kg/L = t per kL)1.1000kg/L

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 1000 m3/d. The inputs, in the units selected above:

InputValue
Spent wash1,000.0 m³/d
COD110,000 mg/L
BOD₅50,000 mg/L
Total solids120.00 g/L
Alcohol produced (absolute)100.00 kL/d

Applying the formula below gives:

ResultValue
COD load110.00 t/d
BOD load50.000 t/d
Solids load120.00 t/d
COD per volume of alcohol (kg/L = t per kL)1.1000 kg/L

Open this example in the calculator and change any input.

Formula

\(L = \dot V c\)

Variables

Symbol Meaning SI unit
\(\dot V\) Spent wash m³/s
\(COD\) COD kg/m³
\(BOD\) BOD₅ kg/m³
\(TS\) Total solids kg/m³
\(\dot V_e\) Alcohol produced (absolute) m³/s
\(L_{COD}\) COD load kg/s
\(L_{BOD}\) BOD load kg/s
\(L_{TS}\) Solids load kg/s
\(L_{COD}/\dot V_e\) COD per volume of alcohol (kg/L = t per kL) kg/m³

Method and standards

Mass balance.

Where it is used

  • Effluent treatment design.
  • Consent reporting.

Common mistakes

  • mg/L treated as kg/m³.

Assumptions and limits

  • Daily averages.
  • COD per alcohol is shown in kg/L, which is the same number as tonnes of COD per kL of alcohol.

References

  • Load = flow × concentration

Questions and answers

Typical molasses spent wash?

COD around 80 000–160 000 mg/L and BOD around 40 000–60 000 mg/L.

Why load per kL?

It compares plants independent of size.

Unit check?

mg/L equals g/m³: 100 000 mg/L on 1000 m³/d is 100 t/d of COD.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.