Worked example
Example: 25 t/h on slop + coal. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Steam demand | 25.000 t/h |
| Steam pressure (absolute) | 46.000 bar |
| Steam temperature | 400.00 °C |
| Feedwater temperature | 105.00 °C |
| Concentrate fired | 10.000 t/h |
| Concentrate NCV (as fired) | 6,500.0 kJ/kg |
| Efficiency on concentrate (net) | 65.000 % |
| Support fuel NCV | 21,000 kJ/kg |
| Efficiency on support fuel (net) | 82.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Heat per kg of steam | 2,760.2 kJ/kg |
| Steam from concentrate | 15.307 t/h |
| Support fuel | 1.5538 t/h |
| Concentrate share of heat input | 66.578 % |
Open this example in the calculator and change any input.
Formula
\(\dot m_{s,c} = \frac{\dot m_c NCV_c \eta_c}{\Delta h}, \quad \dot m_f = \frac{(\dot m_s - \dot m_{s,c})\Delta h}{NCV_f \eta_f}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot m_s\) | Steam demand | kg/s |
| \(p\) | Steam pressure (absolute) | Pa |
| \(T_s\) | Steam temperature | K |
| \(T_{fw}\) | Feedwater temperature | K |
| \(\dot m_c\) | Concentrate fired | kg/s |
| \(NCV_c\) | Concentrate NCV (as fired) | J/kg |
| \(\eta_c\) | Efficiency on concentrate (net) | - |
| \(NCV_f\) | Support fuel NCV | J/kg |
| \(\eta_f\) | Efficiency on support fuel (net) | - |
| \(\Delta h\) | Heat per kg of steam | J/kg |
| \(\dot m_{s,c}\) | Steam from concentrate | kg/s |
| \(\dot m_f\) | Support fuel | kg/s |
| \(s_c\) | Concentrate share of heat input | - |
Method and standards
Energy balance.
Where it is used
- Incineration boiler sizing and operation.
- Distillery fuel budgets.
Common mistakes
- Gross and net efficiencies mixed.
Assumptions and limits
- Steady firing.
- Feedwater must be liquid at the steam pressure (below its saturation temperature).
References
- Energy balance with IAPWS-IF97 steam and feedwater enthalpies; concentrate NCV from analysis (see slop-concentrate-net-value)
Questions and answers
Why support fuel?
Concentrate at 55–60 % solids burns weakly; coal or bagasse keeps the furnace hot and stable.
Efficiency on concentrate?
Lower than on coal: water in the concentrate leaves as vapour and the ash fouls.
Steam use?
Usually the distillery's own process steam, sometimes through a back-pressure turbine.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.