FireCADCalc

Ash and Potash from Slop (Concentrated Spent Wash) Firing

Ash and K₂O recovered per day from burning concentrated spent wash, from the concentrate rate, its solids, the ash share of solids and the K₂O content of the ash.

Distillery and ethanolBoiler

Inputs

Examples: 230 t/d concentrateLean ash

Results

Potassium-rich ash fouls heat-transfer surfaces: soot blowing and gas velocities matter in slop-fired boilers.

All ash is taken as recovered: fly-ash carry-over and support-fuel ash are not separated.

Ash35.420t/d
K₂O in ash10.626t/d

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 230 t/d concentrate. The inputs, in the units selected above:

InputValue
Concentrate fired230.00 t/d
Solids in concentrate55.000 %
Ash % of solids28.000 %
K₂O % of ash30.000 %

Applying the formula below gives:

ResultValue
Ash35.420 t/d
K₂O in ash10.626 t/d

Open this example in the calculator and change any input.

Formula

\(\dot m_a = \dot m_c x a, \quad \dot m_K = \dot m_a k\)

Variables

Symbol Meaning SI unit
\(\dot m_c\) Concentrate fired kg/s
\(x\) Solids in concentrate -
\(a\) Ash % of solids -
\(k\) K₂O % of ash -
\(\dot m_a\) Ash kg/s
\(\dot m_K\) K₂O in ash kg/s

Method and standards

Mass balance.

Where it is used

  • Incineration boiler ash handling.
  • Potash by-product planning.

Common mistakes

  • Ash % of concentrate used as % of solids.

Assumptions and limits

  • All ash recovered as saleable ash. Fly ash carried over with the flue gas, and ash from any support fuel (coal or bagasse fired with the slop), are not separated: deduct the carry-over and keep support-fuel ash apart.

References

  • Mass balance

Questions and answers

Why is the ash valuable?

It is rich in potassium and sold as a fertiliser ingredient.

Ash share of solids?

Measure it; molasses spent wash solids carry a large inorganic fraction.

Boiler problem?

Low-melting alkali salts foul and corrode; design gas velocities and cleaning for it.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.