FireCADCalc

Biogas H₂S Load and Scrubber Media Consumption

Hydrogen sulphide and sulphur removed per day from the biogas flow and H₂S content, and the scrubber media used at its sulphur capacity.

Distillery and ethanol

Inputs

Examples: 36 000 Nm3/d at 2 %Low sulphur

Results

Spent wash biogas often carries 1–3 % H₂S from sulphate: size the scrubber on measured gas.

H₂S removed74.495kg/d
Sulphur removed70.088kg/d
Media consumed233.63kg/d

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 36 000 Nm3/d at 2 %. The inputs, in the units selected above:

InputValue
Biogas36,000 Nm³/d
H₂S in biogas (by volume)2.0000 %
Removal95.000 %
Media capacity (kg S per kg media)0.25000 kg/kg

Applying the formula below gives:

ResultValue
H₂S removed1,039.9 kg/d
Sulphur removed978.36 kg/d
Media consumed3,913.5 kg/d

Open this example in the calculator and change any input.

Formula

\(\dot n = \frac{\dot V_b y_{H_2S} \eta}{V_m}, \quad \dot m_S = \dot n M_S, \quad \dot m_m = \frac{\dot m_S}{q_S}\)

Variables

Symbol Meaning SI unit
\(\dot V_b\) Biogas Nm³/s
\(y_{H_2S}\) H₂S in biogas (by volume) -
\(\eta\) Removal -
\(q_S\) Media capacity (kg S per kg media) kg/kg
\(\dot m_{H_2S}\) H₂S removed kg/s
\(\dot m_S\) Sulphur removed kg/s
\(\dot m_m\) Media consumed kg/s

Method and standards

Stoichiometry.

Where it is used

  • Scrubber sizing.
  • Media budgets.

Common mistakes

  • ppm entered as %.

Assumptions and limits

  • Ideal gas.

References

  • Ideal gas at 0 °C
  • 1 atm (molar volume, CODATA); IUPAC atomic masses

Questions and answers

Why remove H₂S?

It corrodes engines and boilers and makes SO₂ when burnt.

1 % H₂S is how much?

About 15 kg of H₂S per 1000 Nm³ of biogas.

Media capacity?

Depends on the media and regeneration; take the supplier's figure.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.