Worked example
Example: White sugar 50 brix. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Absorbance at 420 nm (filtered, pH adjusted) | 0.12000 - |
| Cell length | 1.0000 cm |
| Solution brix | 50.000 % |
| Solution density | 1,230.0 kg/m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Concentration (g of solids per mL) | 0.61500 |
| Colour, ICUMSA units | 195.12 |
Open this example in the calculator and change any input.
Formula
\(IU = \frac{1000\,A}{b\,c}, \quad c = \frac{Bx\,\rho}{1000}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(A\) | Absorbance at 420 nm (filtered, pH adjusted) | - |
| \(b\) | Cell length | m |
| \(Bx\) | Solution brix | - |
| \(\rho\) | Solution density | kg/m³ |
| \(c\) | Concentration (g of solids per mL) | - |
| \(IU\) | Colour, ICUMSA units | - |
Method and standards
ICUMSA definition.
Where it is used
- Grading plantation white and refined sugar.
- Process colour control.
Common mistakes
- Cell length in mm.
- Brix without density.
Assumptions and limits
- Method conditions as ICUMSA.
- Brix and density are separate inputs and are not checked against each other: enter the density that belongs to the brix (for example from a sucrose density table).
- A note appears for absorbances outside about 0.2–0.8, where photometer readings are less precise.
References
- ICUMSA colour definition: IU = 1000 A/(b c)
- b in cm
- c in g/mL (ICUMSA Methods GS2/3-10 and GS1/3-7)
Questions and answers
What does 1000 in the formula do?
It scales the attenuation index to the familiar ICUMSA unit.
Why concentration in g/mL?
The definition divides by solids per millilitre, so brix times density/1000.
Why pH 7 and 420 nm?
Colour depends on pH and wavelength; the method fixes both.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.