FireCADCalc

Batch Centrifugal Charge and Hourly Capacity (Hugot)

Massecuite a batch centrifugal basket holds from its size (Hugot eqns 35.18–35.23), the largest layer, and hourly massecuite and sugar from cycles and machines.

Sugar mill and cogeneration

Inputs

Examples: 1 220 x 760, 20 cycles, 4 machinesC machines

By mass: the crystal content of the massecuite less what the wash dissolves.

Results

The hourly output uses Hugot's practical charge 340 D²H (D, H in m); the layer and geometric charge are for checking the basket. Cycles: A and B 18–25 per hour, low grade 2–4.

The charge from this layer is less than the practical charge used for the hourly output: the hourly figures are then optimistic.

Largest layer 0.14 D149.10mm
Charge from the layer, π e H (D − e)270.76L
Practical charge 340 D²H293.08L
Massecuite per hour (practical charge)7.0340m³/h
Sugar per hour3.3763t/h

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 1 220 x 760, 20 cycles, 4 machines. The inputs, in the units selected above:

InputValue
Basket diameter1.2200 m
Basket height0.76000 m
Layer thickness at full charge150.00 mm
Cycles per hour20.000 -
Number of machines4.0000 -
Massecuite density1,470.0 kg/m³
Sugar per massecuite (kg sugar per kg massecuite)45.000 %

Applying the formula below gives:

ResultValue
Largest layer 0.14 D170.80 mm
Charge from the layer, π e H (D − e)383.21 L
Practical charge 340 D²H384.60 L
Massecuite per hour (practical charge)30.768 m³/h
Sugar per hour20.353 t/h

Open this example in the calculator and change any input.

Formula

\(e_M = 0.14D, \quad V = \pi e H(D - e), \quad V_p = 340D^2H\ [\mathrm L;\ D, H\ \mathrm m], \quad \dot V = V_p N z, \quad \dot m_s = \dot V \rho_m x\)

Variables

Symbol Meaning SI unit
\(D\) Basket diameter m
\(H\) Basket height m
\(e\) Layer thickness at full charge m
\(N\) Cycles per hour -
\(z\) Number of machines -
\(\rho_m\) Massecuite density kg/m³
\(x\) Sugar per massecuite -
\(e_M\) Largest layer 0.14 D m
\(V\) Charge from the layer, π e H (D − e) m³
\(V_p\) Practical charge 340 D²H m³
\(\dot V\) Massecuite per hour (practical charge) m³/s
\(\dot m_s\) Sugar per hour kg/s

Method and standards

Hugot's basket geometry rules.

Where it is used

  • Sizing centrifugal batteries.
  • Checking cycles needed.

Common mistakes

  • Entering diameters in mm in the 340 D²H rule.
  • Overfilling the basket.

Assumptions and limits

  • Batch machines. The hourly output uses the practical charge; the layer thickness and geometric charge do not change it, but notes appear when the layer exceeds 0.14 D or gives less than the practical charge.
  • x is kg of sugar per kg of massecuite.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 35
  • capacity of centrifugals
  • eqns 35.18–35.23
  • pp. 766–770

Questions and answers

Why limit the layer?

A thick layer purges slowly and unevenly; Hugot limits it to about 14 % of the diameter.

Practical or geometric charge?

The practical 340 D²H allows for the uneven wall of sugar; the geometric charge is an upper bound.

Sugar per massecuite?

From the crystal content; see the massecuite crystal content calculator.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.