Worked example
Example: Heavy-duty shredder. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Pol in open cells (wash extraction) % cane | 12.200 % |
| Total pol (full disintegration) % cane | 13.500 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Preparation index | 90.370 % |
Open this example in the calculator and change any input.
Formula
\(PI = \frac{Pol_o}{Pol_t}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(Pol_o\) | Pol in open cells (wash extraction) % cane | - |
| \(Pol_t\) | Total pol (full disintegration) % cane | - |
| \(PI\) | Preparation index | - |
Method and standards
Definition.
Where it is used
- Shredder setting.
- Diffuser and mill feed preparation.
Common mistakes
- Comparing PI from different methods.
Assumptions and limits
- Same sample for both pols. PI depends on the wash method (time, water ratio, mixing): compare values only from the same method.
References
- Preparation index definition (pol in open cells / total pol); test methods by SASTA and ICUMSA
Questions and answers
What PI is good?
Heavy-duty shredders reach about 90 % and above.
Why does PI raise extraction?
Juice in open cells is easy to express or wash out.
How is it measured?
A sample is washed briefly for open-cell pol and disintegrated for total pol.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.