Worked example
Example: Shows 150 °C at 0.95, steel of 0.3, 30 °C background. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Temperature shown by the instrument | 150.00 °C |
| Emissivity set in the instrument | 0.95000 - |
| Real emissivity of the surface | 0.30000 - |
| Reflected (background) temperature | 30.000 °C |
Applying the formula below gives:
| Result | Value |
|---|---|
| True surface temperature | 263.96 °C |
| Correction (true − shown) | 113.96 K |
Open this example in the calculator and change any input.
Formula
\(\varepsilon_{set} T_{ind}^4 + (1 - \varepsilon_{set}) T_r^4 = \varepsilon T^4 + (1 - \varepsilon) T_r^4\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(T_{ind}\) | Temperature shown by the instrument | K |
| \(\varepsilon_{set}\) | Emissivity set in the instrument | - |
| \(\varepsilon\) | Real emissivity of the surface | - |
| \(T_{refl}\) | Reflected (background) temperature | K |
| \(T\) | True surface temperature | K |
| \(\Delta T\) | Correction (true − shown) | K |
Method and standards
Radiance balance, broadband.
Where it is used
- Thermography surveys of insulation and steam traps.
- Spot checks of bearings and motors.
Common mistakes
- Default 0.95 on bare metal.
- Ignoring reflections.
Assumptions and limits
- Grey, opaque surface; broadband model.
References
- Stefan–Boltzmann law with reflected radiation
- εT⁴ + (1 − ε)T_r⁴
Questions and answers
An IR gun set to 0.95 shows 150 °C on bright steel of emissivity 0.3: true temperature?
Much higher, around 260 °C with a 30 °C background: low emissivity surfaces read far low.
Why include the background?
A shiny surface reflects its surroundings, which the instrument also sees.
How to measure shiny metal?
Paint a spot or use tape of known emissivity.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.