FireCADCalc

Respiration Heat of Stored Fruit and Vegetables

Heat generated by respiring fresh produce in storage from its mass and temperature, using the commodity's published respiration coefficients (f, g).

Food, dairy and textile

Inputs

Examples: 20 t at 2 °C, illustrative f and gLeafy crop 5 t at 5 °C

Results

Becker–Fricke correlation q = (10.7f/3600)(9t/5 + 32)^g W/kg with f and g from the commodity tables in ASHRAE Refrigeration (ch. 19). Respiration heat roughly doubles for each 10 K rise.

Specific respiration heat (mW/kg)18.121
Respiration heat load0.36241kW
Heat per day31.312MJ

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 20 t at 2 °C, illustrative f and g. The inputs, in the units selected above:

InputValue
Product mass20.000 t
Storage temperature2.0000 °C
Respiration coefficient f5.6871e-04 -
Respiration exponent g2.5977 -

Applying the formula below gives:

ResultValue
Specific respiration heat (mW/kg)18.121
Respiration heat load0.36241 kW
Heat per day31.312 MJ

Open this example in the calculator and change any input.

Formula

\(q = \frac{10.7f}{3600}\left(\frac95t + 32\right)^g\ \ \mathrm{W/kg}\)

Variables

Symbol Meaning SI unit
\(m\) Product mass kg
\(t\) Storage temperature K
\(f\) Respiration coefficient f -
\(g\) Respiration exponent g -
\(q\) Specific respiration heat (mW/kg) -
\(Q\) Respiration heat load W
\(E_d\) Heat per day J

Method and standards

Becker–Fricke correlation.

Where it is used

  • Cold store refrigeration load.
  • Ripening rooms and pack houses.

Common mistakes

  • Using frozen-product data for fresh produce.
  • Ignoring ripening rooms' higher rates.

Assumptions and limits

  • Fresh produce; t in °C.

References

  • Becker
  • Misra and Fricke (1996)
  • Int. J. Refrig. 19: 2 (respiration correlation); ASHRAE Handbook—Refrigeration (2018)
  • ch. 19

Questions and answers

Why does stored produce make heat?

Fruits and vegetables are alive: they burn sugars with oxygen and release heat, CO₂ and moisture.

Why store cold?

Respiration (and so ripening and weight loss) slows sharply as temperature falls.

What do the defaults represent?

20 t of a hard fruit at 2 °C with illustrative respiration coefficients; enter the commodity's own f and g.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.