Worked example
Example: 50 W/(m²·K) and 0.04 W/(m·K). The inputs, in the units selected above:
| Input | Value |
|---|---|
| Heat transfer coefficient (choose its unit) | 50.000 W/(m²·K) |
| Thermal conductivity (choose its unit) | 0.040000 W/(m·K) |
Applying the formula below gives:
| Result | Value |
|---|---|
| Coefficient in W/(m²·K) | 50.000 W/(m²·K) |
| Coefficient in kcal/(h·m²·°C) | 42.992 kcal/(h·m²·°C) |
| Coefficient in Btu/(h·ft²·°F) | 8.8055 Btu/(h·ft²·°F) |
| Conductivity in W/(m·K) | 0.040000 W/(m·K) |
| Conductivity in kcal/(h·m·°C) | 0.034394 kcal/(h·m·°C) |
| Conductivity in Btu/(h·ft·°F) | 0.023112 Btu/(h·ft·°F) |
Open this example in the calculator and change any input.
Formula
\(1\ \text{kcal/(h·m}^2\text{·°C)} = 1.163\ \text{W/(m}^2\text{·K)}, \quad 1\ \text{Btu/(h·ft}^2\text{·°F)} = 5.678\,26\ \text{W/(m}^2\text{·K)}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(h\) | Heat transfer coefficient (choose its unit) | W/(m²·K) |
| \(k\) | Thermal conductivity (choose its unit) | W/(m·K) |
Method and standards
Factors built from the exact kilocalorie, Btu, foot and degree definitions.
Where it is used
- Heat exchanger and insulation data from old or foreign sheets.
- Comparing U values.
- Insulation conductivities.
Common mistakes
- Mixing gauge and absolute values.
- Rounding a factor early and carrying the error.
- Converting a difference with an offset (temperatures).
Assumptions and limits
- Units only.
References
- NIST SP 811 (2008)
- Appendix B conversion factors
Questions and answers
What is 1 kcal/(h·m²·°C) in W/(m²·K)?
1.163 W/(m²·K) exactly.
And 1 Btu/(h·ft²·°F)?
5.678 W/(m²·K).
What is 1 Btu/(h·ft·°F) as a conductivity?
1.731 W/(m·K).
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.