FireCADCalc

Heat Transfer Coefficient and Conductivity Converter

Convert a heat transfer coefficient between W/(m²·K), kcal/(h·m²·°C) and Btu/(h·ft²·°F), and a thermal conductivity between W/(m·K), kcal/(h·m·°C) and Btu/(h·ft·°F).

Inputs

Examples: 50 W/(m²·K) and 0.04 W/(m·K)1 000 kcal/(h·m²·°C) and 40 kcal/(h·m·°C)

Results

1 kcal/(h·m²·°C) = 1.163 W/(m²·K) and 1 kcal/(h·m·°C) = 1.163 W/(m·K) exactly; the Btu units use the International Table Btu.

Coefficient in W/(m²·K)1,163.0W/(m²·K)
Coefficient in kcal/(h·m²·°C)1,000.0kcal/(h·m²·°C)
Coefficient in Btu/(h·ft²·°F)204.82Btu/(h·ft²·°F)
Conductivity in W/(m·K)46.520W/(m·K)
Conductivity in kcal/(h·m·°C)40.000kcal/(h·m·°C)
Conductivity in Btu/(h·ft·°F)26.879Btu/(h·ft·°F)

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 50 W/(m²·K) and 0.04 W/(m·K). The inputs, in the units selected above:

InputValue
Heat transfer coefficient (choose its unit)50.000 W/(m²·K)
Thermal conductivity (choose its unit)0.040000 W/(m·K)

Applying the formula below gives:

ResultValue
Coefficient in W/(m²·K)50.000 W/(m²·K)
Coefficient in kcal/(h·m²·°C)42.992 kcal/(h·m²·°C)
Coefficient in Btu/(h·ft²·°F)8.8055 Btu/(h·ft²·°F)
Conductivity in W/(m·K)0.040000 W/(m·K)
Conductivity in kcal/(h·m·°C)0.034394 kcal/(h·m·°C)
Conductivity in Btu/(h·ft·°F)0.023112 Btu/(h·ft·°F)

Open this example in the calculator and change any input.

Formula

\(1\ \text{kcal/(h·m}^2\text{·°C)} = 1.163\ \text{W/(m}^2\text{·K)}, \quad 1\ \text{Btu/(h·ft}^2\text{·°F)} = 5.678\,26\ \text{W/(m}^2\text{·K)}\)

Variables

Symbol Meaning SI unit
\(h\) Heat transfer coefficient (choose its unit) W/(m²·K)
\(k\) Thermal conductivity (choose its unit) W/(m·K)

Method and standards

Factors built from the exact kilocalorie, Btu, foot and degree definitions.

Where it is used

  • Heat exchanger and insulation data from old or foreign sheets.
  • Comparing U values.
  • Insulation conductivities.

Common mistakes

  • Mixing gauge and absolute values.
  • Rounding a factor early and carrying the error.
  • Converting a difference with an offset (temperatures).

Assumptions and limits

  • Units only.

References

  • NIST SP 811 (2008)
  • Appendix B conversion factors

Questions and answers

What is 1 kcal/(h·m²·°C) in W/(m²·K)?

1.163 W/(m²·K) exactly.

And 1 Btu/(h·ft²·°F)?

5.678 W/(m²·K).

What is 1 Btu/(h·ft·°F) as a conductivity?

1.731 W/(m·K).

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.