FireCADCalc

Heat Flux Unit Converter (W/m², kcal/h·m², Btu/h·ft²)

Convert a heat flux or heat release rate between W/m², kW/m², MW/m², kcal/(h·m²) and Btu/(h·ft²), as used for furnace and heating surface loading.

Inputs

Examples: 100 kW/m210 000 kcal/h m2

Results

1 kcal/(h·m²) = 1.163 W/m².

watt per square metre100,000W/m²
kilowatt per square metre100.00kW/m²
megawatt per square metre0.10000MW/m²
kilocalorie per hour square metre85,985kcal/(h·m²)
Btu per hour square foot31,700Btu/(h·ft²)

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 100 kW/m2. The inputs, in the units selected above:

InputValue
Heat flux (choose its unit)100,000 W/m²

Applying the formula below gives:

ResultValue
watt per square metre100,000 W/m²
kilowatt per square metre100.00 kW/m²
megawatt per square metre0.10000 MW/m²
kilocalorie per hour square metre85,985 kcal/(h·m²)
Btu per hour square foot31,700 Btu/(h·ft²)

Open this example in the calculator and change any input.

Formula

\(x_{\text{unit}} = \frac{x_{SI}}{f_{\text{unit}}}\)

Variables

Symbol Meaning SI unit
\(x\) Heat flux (choose its unit) W/m²

Method and standards

Each unit's factor to the SI unit is held once in the unit registry.

Where it is used

  • Reading foreign drawings and data sheets.
  • Examinations and everyday engineering.

Common mistakes

  • Mixing similar units (US and imperial).
  • Rounding factors too early.

Assumptions and limits

  • Exact factors where the definition is exact.

References

  • Unit definitions per NIST SP 811 and the SI Brochure (exact where defined)

Questions and answers

100 kW/m²?

About 85,985 kcal/(h·m²).

Btu/(h·ft²)?

1 kW/m² is about 317 Btu/(h·ft²).

Furnace loading?

Heat release per area often uses these units.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.