Worked example
Example: 100 kW/m2. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Heat flux (choose its unit) | 100,000 W/m² |
Applying the formula below gives:
| Result | Value |
|---|---|
| watt per square metre | 100,000 W/m² |
| kilowatt per square metre | 100.00 kW/m² |
| megawatt per square metre | 0.10000 MW/m² |
| kilocalorie per hour square metre | 85,985 kcal/(h·m²) |
| Btu per hour square foot | 31,700 Btu/(h·ft²) |
Open this example in the calculator and change any input.
Formula
\(x_{\text{unit}} = \frac{x_{SI}}{f_{\text{unit}}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(x\) | Heat flux (choose its unit) | W/m² |
Method and standards
Each unit's factor to the SI unit is held once in the unit registry.
Where it is used
- Reading foreign drawings and data sheets.
- Examinations and everyday engineering.
Common mistakes
- Mixing similar units (US and imperial).
- Rounding factors too early.
Assumptions and limits
- Exact factors where the definition is exact.
References
- Unit definitions per NIST SP 811 and the SI Brochure (exact where defined)
Questions and answers
100 kW/m²?
About 85,985 kcal/(h·m²).
Btu/(h·ft²)?
1 kW/m² is about 317 Btu/(h·ft²).
Furnace loading?
Heat release per area often uses these units.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.