FireCADCalc

Inductive and Capacitive Reactance, Impedance and Resonance

Inductive and capacitive reactance at a frequency, impedance, current and phase angle of a series RLC circuit, its resonant frequency, Q factor and bandwidth.

Electrician and wireman licence examinations

Inputs

Examples: 50 Hz, 10 Ω, 0.1 H, 100 µF, 230 V1 kHz, 50 Ω, 10 mH, 1 µF, 10 V60 Hz, 5 Ω, 0.2 H, 20 µF, 120 V (capacitive)

Above zero: a series RLC circuit. For a resistor and capacitor alone use the RC time constant calculator.

Results

Series circuit with ideal components. At resonance X_L = X_C, the impedance falls to R and the voltage across L and C can be Q times the supply.

Inductive reactance 2πfL31.416Ω
Capacitive reactance 1 / (2πfC)31.831Ω
Net reactance X_L − X_C-0.41506Ω
Impedance10.009Ω
Phase angle (positive = current lags)-2.3768°
Current22.980A
Power factor0.99914
Resonant frequency 1 / (2π√(LC))50.329Hz
Quality factor (1/R)√(L/C)3.1623
Bandwidth f₀ / Q15.915Hz

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 50 Hz, 10 Ω, 0.1 H, 100 µF, 230 V. The inputs, in the units selected above:

InputValue
Supply frequency50.000 Hz
Resistance10.000 Ω
Inductance100.00 mH
Capacitance100.00 µF
Supply voltage (rms)230.00 V

Applying the formula below gives:

ResultValue
Inductive reactance 2πfL31.416 Ω
Capacitive reactance 1 / (2πfC)31.831 Ω
Net reactance X_L − X_C-0.41506 Ω
Impedance10.009 Ω
Phase angle (positive = current lags)-2.3768 °
Current22.980 A
Power factor0.99914
Resonant frequency 1 / (2π√(LC))50.329 Hz
Quality factor (1/R)√(L/C)3.1623
Bandwidth f₀ / Q15.915 Hz

Open this example in the calculator and change any input.

Formula

\(X_L = 2\pi f L, \quad X_C = \frac{1}{2\pi f C}, \quad Z = \sqrt{R^2 + (X_L - X_C)^2}\)

\(f_0 = \frac{1}{2\pi\sqrt{LC}}, \quad Q = \frac{1}{R}\sqrt{\frac{L}{C}}\)

Variables

Symbol Meaning SI unit
\(f\) Supply frequency 1/s
\(R\) Resistance Ω
\(L\) Inductance H
\(C\) Capacitance F
\(V\) Supply voltage (rms) V
\(X_L\) Inductive reactance 2πfL Ω
\(X_C\) Capacitive reactance 1 / (2πfC) Ω
\(X\) Net reactance X_L − X_C Ω
\(Z\) Impedance Ω
\(\varphi\) Phase angle (positive = current lags) rad
\(I\) Current A
\(\cos\varphi\) Power factor -
\(f_0\) Resonant frequency 1 / (2π√(LC)) 1/s
\(Q\) Quality factor (1/R)√(L/C) -
\(BW\) Bandwidth f₀ / Q 1/s

Method and standards

Series RLC impedance with phasors.

Where it is used

  • Capacitor banks and harmonic resonance.
  • Filters.
  • Electrical examinations.

Common mistakes

  • Using f instead of ω = 2πf.
  • µF entered as F.

Assumptions and limits

  • Ideal components, series connection.
  • R, L and C must all be above zero; a circuit without an inductor has no resonance.

References

  • AC circuit theory (phasors)

Questions and answers

What is the impedance of 10 Ω, 0.1 H and 100 µF in series at 50 Hz?

X_L 31.42 Ω and X_C 31.83 Ω nearly cancel: Z = 10.01 Ω, so 230 V drives 23.0 A. The circuit resonates at 50.3 Hz.

Why can resonance be dangerous?

The voltage across L and C can be Q times the supply.

What is Q?

√(L/C)/R: here 3.16, with a 15.9 Hz bandwidth.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.