Worked example
Example: 12 V, 4 Ω source into 8 Ω. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Source (Thévenin) voltage | 12.000 V |
| Source (internal) resistance | 4.0000 Ω |
| Load resistance | 8.0000 Ω |
Applying the formula below gives:
| Result | Value |
|---|---|
| Current | 1.0000 A |
| Power in the load | 8.0000 W |
| Efficiency R_L / (R_th + R_L) | 66.667 % |
| Maximum power (at R_L = R_th) | 9.0000 W |
| Share of the maximum delivered | 88.889 % |
Open this example in the calculator and change any input.
Formula
\(P_L = \frac{V_{th}^2 R_L}{(R_{th} + R_L)^2}, \quad P_{max} = \frac{V_{th}^2}{4 R_{th}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(V_{th}\) | Source (Thévenin) voltage | V |
| \(R_{th}\) | Source (internal) resistance | Ω |
| \(R_L\) | Load resistance | Ω |
| \(I\) | Current | A |
| \(P_L\) | Power in the load | W |
| \(\eta\) | Efficiency R_L / (R_th + R_L) | - |
| \(P_{max}\) | Maximum power (at R_L = R_th) | W |
| \(P_L/P_{max}\) | Share of the maximum delivered | - |
Method and standards
Derivative of load power with respect to R_L is zero at R_L = R_th.
Where it is used
- Audio, RF and sensor matching.
- Battery internal resistance.
Common mistakes
- Assuming maximum power means maximum efficiency.
Assumptions and limits
- Resistive source and load.
References
- Maximum power transfer theorem (Jacobi's law)
Questions and answers
What is the most a 12 V, 4 Ω source can deliver?
9 W into a 4 Ω load, at 50 % efficiency.
And into 8 Ω?
8 W at 66.7 % efficiency.
Do power systems match loads?
No: they aim for efficiency, so the load resistance is far above the source's.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.