Worked example
Example: Sine, 325.27 V peak. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Waveform | Sine wave |
| Peak value (volts or amperes) | 325.27 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| RMS value | 230.00 |
| Average value (of the rectified wave) | 207.07 |
| Form factor (RMS / average) | 1.1107 |
| Crest factor (peak / RMS) | 1.4142 |
Open this example in the calculator and change any input.
Formula
\(V_{rms} = \sqrt{\frac{1}{T}\int_0^T v^2\, dt}, \quad V_{avg} = \frac{1}{T}\int_0^T |v|\, dt\)
\(k_f = \frac{V_{rms}}{V_{avg}}, \quad k_c = \frac{V_p}{V_{rms}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\text{wave}\) | Waveform | - |
| \(V_p\) | Peak value (volts or amperes) | - |
| \(V_{rms}\) | RMS value | - |
| \(V_{avg}\) | Average value (of the rectified wave) | - |
| \(k_f\) | Form factor (RMS / average) | - |
| \(k_c\) | Crest factor (peak / RMS) | - |
Method and standards
Closed-form integrals of each waveform over one period.
Where it is used
- Rectifier and meter work.
- Electrical examinations.
Common mistakes
- Using 0.707 for non-sine waves.
- Confusing average with RMS.
Assumptions and limits
- Ideal waveforms, no DC offset.
References
- Definitions of RMS and mean values (integrals over one period)
Questions and answers
What is the RMS of a 325 V peak sine wave?
230 V; form factor 1.11 and crest factor 1.414.
And of a half-wave rectified sine?
RMS V_p/2, average V_p/π, form factor 1.57.
Why does form factor matter?
Average-responding meters assume 1.11 and misread other shapes.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.