FireCADCalc

LED Series Resistor Calculator

Series resistor for one or more LEDs from the supply voltage, LED forward voltage and current, with the power in the resistor and the circuit efficiency.

Inputs

Examples: Three 2 V LEDs at 20 mA on 12 VOne 3.2 V white LED at 350 mA on 5 VPanel lamp: one 2.1 V LED at 10 mA on 24 V

Results

Choose the next higher standard resistor and a power rating at least twice P_R.

Series resistor5.1429Ω
Power in the resistor0.63000W
Power in the LEDs1.1200W
Share of the power reaching the LEDs64.000%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Three 2 V LEDs at 20 mA on 12 V. The inputs, in the units selected above:

InputValue
Supply voltage12.000 V
Forward voltage of one LED2.0000 V
LED current20.000 mA
LEDs in series3.0000 -

Applying the formula below gives:

ResultValue
Series resistor300.00 Ω
Power in the resistor0.12000 W
Power in the LEDs0.12000 W
Share of the power reaching the LEDs50.000 %

Open this example in the calculator and change any input.

Formula

\(R = \frac{V_s - n V_f}{I}, \quad P_R = (V_s - n V_f)\, I\)

Variables

Symbol Meaning SI unit
\(V_s\) Supply voltage V
\(V_f\) Forward voltage of one LED V
\(I\) LED current A
\(n\) LEDs in series -
\(R\) Series resistor Ω
\(P_R\) Power in the resistor W
\(P_{LED}\) Power in the LEDs W
\(\eta\) Share of the power reaching the LEDs -

Method and standards

The resistor drops the voltage the LEDs do not.

Where it is used

  • Indicator lamps on panels.
  • Hobby and repair work.

Common mistakes

  • Forgetting the LED drop.
  • Under-rated resistor power.

Assumptions and limits

  • Constant forward voltage.

References

  • Ohm's law across the series resistor

Questions and answers

What resistor for three 2 V LEDs at 20 mA on 12 V?

(12 − 6) / 0.02 = 300 Ω, dissipating 0.12 W.

Which standard value?

The next higher, 330 Ω, for slightly less current.

Why not put LEDs in parallel on one resistor?

Their forward voltages differ, so they share current unevenly.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.