FireCADCalc

Heater Element: Resistance, Current and Power at Another Voltage

Resistance and current of a resistive heater from its rated power and voltage, and the power and current when run at a different voltage.

Electrician and wireman licence examinations

Inputs

Examples: 3 kW at 210 V9 kW, 415 V element on 440 V

Results

Assumes constant resistance; real elements change resistance a little with temperature.

Resistance V²/P19.136Ω
Rated current21.687A
Power at the actual voltage10.117kW
Current at the actual voltage22.993A

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 3 kW at 210 V. The inputs, in the units selected above:

InputValue
Rated power3.0000 kW
Rated voltage230.00 V
Actual voltage210.00 V

Applying the formula below gives:

ResultValue
Resistance V²/P17.633 Ω
Rated current13.043 A
Power at the actual voltage2.5009 kW
Current at the actual voltage11.909 A

Open this example in the calculator and change any input.

Formula

\(R = \frac{V_r^2}{P_r}, \quad P = \frac{V^2}{R}\)

Variables

Symbol Meaning SI unit
\(P_r\) Rated power W
\(V_r\) Rated voltage V
\(V\) Actual voltage V
\(R\) Resistance V²/P Ω
\(I_r\) Rated current A
\(P\) Power at the actual voltage W
\(I\) Current at the actual voltage A

Method and standards

Ohm's law.

Where it is used

  • Heaters, ovens and tracing.
  • Electrician examinations.

Common mistakes

  • Assuming power is constant.
  • Using line voltage for star-connected elements.

Assumptions and limits

  • Constant resistance.

References

  • Ohm's law and P = V²/R

Questions and answers

3 kW, 230 V heater on 210 V?

R 17.63 Ω; power falls to 2.50 kW.

Why does power fall so much?

It goes with the square of voltage.

Three-phase heaters?

Apply per element with its own voltage (phase or line).

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.