FireCADCalc

Ring Spinning Production per Spindle and per Frame

Yarn delivery speed and production of a ring frame from spindle speed, twists per metre, count, spindles and efficiency.

Food, dairy and textile

Inputs

Examples: 18 000 rpm, 900 TPM, 19.7 texCoarse 12 000 rpm

Results

Delivery speed24.000m/min
Production per spindle76.464g/h
Production per frame73.405kg/h

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 18 000 rpm, 900 TPM, 19.7 tex. The inputs, in the units selected above:

InputValue
Spindle speed18,000 rpm
Twists per metre900.00 -
Yarn linear density (tex = g/km)19.700 -
Spindles per frame1,200.0 -
Efficiency92.000 %

Applying the formula below gives:

ResultValue
Delivery speed20.000 m/min
Production per spindle21.749 g/h
Production per frame26.099 kg/h

Open this example in the calculator and change any input.

Formula

\(v = \frac{N}{TPM}, \quad p_s = v\,T \times 10^{-6}\,\eta\ (T\ \text{in tex, kg/m} = 10^{-6}\,T), \quad P_f = n_s\,p_s\)

Variables

Symbol Meaning SI unit
\(N\) Spindle speed 1/s
\(TPM\) Twists per metre -
\(T\) Yarn linear density (tex = g/km) -
\(n_s\) Spindles per frame -
\(\eta\) Efficiency -
\(v\) Delivery speed m/s
\(p_s\) Production per spindle kg/s
\(P_f\) Production per frame kg/s

Method and standards

Delivery definition.

Where it is used

  • Spinning capacity planning.

Common mistakes

  • Using TPI with metres.
  • Forgetting doffing time in efficiency.

Assumptions and limits

  • Traveller lag neglected.
  • Tex is a plain number in g/km; 10⁻⁶ T is the linear density in kg/m.

References

  • Definitions and mass and energy balances: delivery = spindle speed / twist per metre

Questions and answers

Why does twist cut production?

Each metre of yarn needs TPM spindle turns, so more twist means slower delivery.

What spindle speeds are usual?

14,000–22,000 rpm for cotton ring frames.

Is traveller lag counted?

No; it reduces actual twist slightly.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.