FireCADCalc

Oil Neutralisation: Caustic for FFA and Acid Value

Caustic soda (as 100 % and as lye) to neutralise the free fatty acids of a crude oil (as oleic acid) with an excess, the soap formed, and acid value from FFA.

Food, dairy and textile

Inputs

Examples: 50 t oil, 2 % FFA, 15 % excessRice bran oil 6 %

Results

High-FFA oils (above about 5 %) lose too much neutral oil in soapstock; physical refining (steam stripping of FFA) suits them better.

The soap is sodium oleate only; the neutral oil entrained in the soapstock (the refining loss) is extra and is not estimated here.

Acid value (mg KOH/g)3.9725
Theoretical NaOH141.60kg
NaOH with excess162.84kg
Lye1,017.7kg
Sodium soap formed1,077.8kg

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 50 t oil, 2 % FFA, 15 % excess. The inputs, in the units selected above:

InputValue
Crude oil50,000 kg
Free fatty acids (as oleic)2.0000 %
Excess caustic (share of theoretical)15.000 %
Lye strength (NaOH by mass)16.000 %

Applying the formula below gives:

ResultValue
Acid value (mg KOH/g)3.9725
Theoretical NaOH141.60 kg
NaOH with excess162.84 kg
Lye1,017.7 kg
Sodium soap formed1,077.8 kg

Open this example in the calculator and change any input.

Formula

\(m_{th} = \frac{M\,FFA}{M_{oleic}}M_{NaOH}, \quad AV = FFA\cdot1000\frac{M_{KOH}}{M_{oleic}}\)

Variables

Symbol Meaning SI unit
\(M\) Crude oil kg
\(FFA\) Free fatty acids (as oleic) -
\(x\) Excess caustic (share of theoretical) -
\(c_l\) Lye strength (NaOH by mass) -
\(AV\) Acid value (mg KOH/g) -
\(m_{th}\) Theoretical NaOH kg
\(m_{NaOH}\) NaOH with excess kg
\(m_{lye}\) Lye kg
\(m_{soap}\) Sodium soap formed kg

Method and standards

Neutralisation stoichiometry.

Where it is used

  • Refinery caustic dosing.

Common mistakes

  • Taking FFA as lauric or palmitic without saying so.
  • Dosing lye as 100 % NaOH.

Assumptions and limits

  • FFA as oleic acid.
  • The soap mass is sodium oleate only; neutral oil carried into the soapstock (refining loss) is not estimated.

References

  • Definitions and mass and energy balances: RCOOH + NaOH → RCOONa + H₂O with FFA as oleic acid (C₁₈H₃₄O₂); IUPAC masses

Questions and answers

What is acid value?

mg KOH to neutralise 1 g of oil: about 1.99 × FFA% as oleic.

Why excess caustic?

To complete the reaction and remove colour and phosphatides; 10–25 % is usual.

What lye strength?

12–20 % NaOH, depending on oil colour and FFA.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.