FireCADCalc

Woven Fabric GSM from Ends, Picks and Yarn Counts

Fabric mass per square metre from ends and picks per cm, warp and weft yarn tex and crimp percentages, and the fabric mass per running metre for a width.

Food, dairy and textile

Inputs

Examples: 40 × 30 per cm, 20/25 texDenim 28 × 18, 74/84 tex

Results

Add size, finishes and moisture regain to compare with a weighed GSM.

Warp contribution227.92g/m²
Weft contribution161.78g/m²
Fabric mass per m²389.70g/m²
Mass per running metre0.62353kg/m

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 40 × 30 per cm, 20/25 tex. The inputs, in the units selected above:

InputValue
Ends per cm40.000 -
Picks per cm30.000 -
Warp yarn tex20.000 -
Weft yarn tex25.000 -
Warp crimp8.0000 %
Weft crimp6.0000 %
Fabric width1.5000 m

Applying the formula below gives:

ResultValue
Warp contribution86.400 g/m²
Weft contribution79.500 g/m²
Fabric mass per m²165.90 g/m²
Mass per running metre0.24885 kg/m

Open this example in the calculator and change any input.

Formula

\(G_w = 100\,n_e\,T_w(1 + c_w), \quad G_f = 100\,n_p\,T_f(1 + c_f), \quad G = G_w + G_f, \quad m_l = G\,W\)

With \(n\) per cm (so \(100n\) per m) and \(T\) in tex (g/km = mg/m), \(G\) comes out in mg/m²; divide by 1000 for g/m².

Variables

Symbol Meaning SI unit
\(n_e\) Ends per cm -
\(n_p\) Picks per cm -
\(T_w\) Warp yarn tex -
\(T_f\) Weft yarn tex -
\(c_w\) Warp crimp -
\(c_f\) Weft crimp -
\(W\) Fabric width m
\(G_w\) Warp contribution kg/m²
\(G_f\) Weft contribution kg/m²
\(G\) Fabric mass per m² kg/m²
\(m_l\) Mass per running metre kg/m

Method and standards

Yarn mass per unit area.

Where it is used

  • Fabric design and costing.

Common mistakes

  • Using ends per inch as per cm.
  • Ignoring crimp.

Assumptions and limits

  • Plain construction; no size or finish.
  • Ends and picks are per cm; the factor 100 turns them into threads per metre.

References

  • Definitions and mass and energy balances: yarn length per m² × linear density
  • with crimp

Questions and answers

Why add crimp?

Yarns interlace, so each metre of fabric holds more than a metre of yarn.

What is 1 tex?

1 g per 1000 m, so 4000 ends/m of 20 tex weigh 80 g/m before crimp.

Is it the greige or finished GSM?

Greige; finishing shrinkage raises GSM.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.