Worked example
Example: 10 min mean, 3.3 min SD. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Mean residence time | 10.000 min |
| Standard deviation of the RTD | 3.3333 min |
| First-order rate constant | 0.004000 1/min |
Applying the formula below gives:
| Result | Value |
|---|---|
| Equivalent tanks in series | 9.0000 |
| First-order conversion with N tanks | 3.9125 % |
| Conversion in plug flow | 3.9211 % |
| Equivalent axial Péclet number (closed vessel, large Pe) | 18.000 |
Open this example in the calculator and change any input.
Formula
\(N = \frac{t_m^2}{\sigma^2}, \quad X_N = 1 - \left(1 + \frac{kt_m}{N}\right)^{-N}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(t_m\) | Mean residence time | s |
| \(\sigma\) | Standard deviation of the RTD | s |
| \(k\) | First-order rate constant | 1/s |
| \(N\) | Equivalent tanks in series | - |
| \(X_N\) | First-order conversion with N tanks | - |
| \(X_{PFR}\) | Conversion in plug flow | - |
| \(Pe\) | Equivalent axial Péclet number (closed vessel, large Pe) | - |
Method and standards
Tanks-in-series model.
Where it is used
- Reactor troubleshooting from tracer tests.
- Holding tube and pasteuriser checks.
Common mistakes
- Using RTD data with a tail cut off.
- Applying it to non-first-order reactions with segregation.
Assumptions and limits
- First order; N from variance.
- N below 1 (a spread wider than one stirred tank) is outside the model and is flagged; Pe ≈ 2N is flagged as rough for N below 5.
References
- Levenspiel
- Chemical Reaction Engineering
- 3rd ed. (Wiley, 1999)
- ch. 14 (tanks-in-series model)
Questions and answers
How do I get the variance?
From a tracer test: σ² = Σ(t − t_m)²C Δt / Σ C Δt.
What does N tell me?
N = 1 is a fully mixed tank; large N approaches plug flow. Holding tubes and long pipes reach N of 20–100.
What do the defaults represent?
A vessel with a 10 min mean residence time and a 3.3 min standard deviation.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.