FireCADCalc

Limiting Reagent and Excess for a Two-Reactant Reaction

Limiting reactant, maximum extent of reaction and percentage excess of the other reactant for aA + bB → products, from the moles fed and coefficients.

Refinery and petrochemicalChemical and fertiliser

Inputs

Examples: N2 + 3 H2, hydrogen in excess2 SO2 + O2, oxygen limitsExact ratio

Results

Limiting reactant (1 = A, 2 = B, 0 = exact ratio)1.0000
Maximum extent0.10000kmol
Excess of the other reactant33.333%
Excess reactant left at full conversion0.10000kmol

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: N2 + 3 H2, hydrogen in excess. The inputs, in the units selected above:

InputValue
Moles of A fed0.10000 kmol
Moles of B fed0.40000 kmol
Coefficient of A1.0000 -
Coefficient of B3.0000 -

Applying the formula below gives:

ResultValue
Limiting reactant (1 = A, 2 = B, 0 = exact ratio)1.0000
Maximum extent0.10000 kmol
Excess of the other reactant33.333 %
Excess reactant left at full conversion0.10000 kmol

Open this example in the calculator and change any input.

Formula

\(\xi_{max} = \min\left(\frac{n_A}{a}, \frac{n_B}{b}\right), \quad E = \frac{n_{excess} - \nu\,\xi_{max}}{\nu\,\xi_{max}}\)

Variables

Symbol Meaning SI unit
\(n_A\) Moles of A fed mol
\(n_B\) Moles of B fed mol
\(a\) Coefficient of A -
\(b\) Coefficient of B -
\(\text{limiting}\) Limiting reactant (1 = A, 2 = B, 0 = exact ratio) -
\(\xi_{max}\) Maximum extent mol
\(E\) Excess of the other reactant -
\(n_{left}\) Excess reactant left at full conversion mol

Method and standards

Stoichiometry.

Where it is used

  • Reactor feed checks.
  • Examinations.

Common mistakes

  • Comparing moles without dividing by coefficients.
  • Masses instead of moles.

Assumptions and limits

  • Single reaction.

References

  • Stoichiometry: extent ξ = n_i/ν_i
  • limiting reactant has the smaller ratio; excess = (fed − needed)/needed

Questions and answers

100 kmol N₂ with 400 kmol H₂ for N₂ + 3H₂?

N₂ limits; hydrogen is in 33 % excess, 100 kmol left at full conversion.

Excess air in combustion?

The same idea, with oxygen as the excess reactant.

Equal ratios?

The feed is exactly stoichiometric: no excess.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.