Worked example
Example: N2 + 3 H2, hydrogen in excess. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Moles of A fed | 0.10000 kmol |
| Moles of B fed | 0.40000 kmol |
| Coefficient of A | 1.0000 - |
| Coefficient of B | 3.0000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Limiting reactant (1 = A, 2 = B, 0 = exact ratio) | 1.0000 |
| Maximum extent | 0.10000 kmol |
| Excess of the other reactant | 33.333 % |
| Excess reactant left at full conversion | 0.10000 kmol |
Open this example in the calculator and change any input.
Formula
\(\xi_{max} = \min\left(\frac{n_A}{a}, \frac{n_B}{b}\right), \quad E = \frac{n_{excess} - \nu\,\xi_{max}}{\nu\,\xi_{max}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(n_A\) | Moles of A fed | mol |
| \(n_B\) | Moles of B fed | mol |
| \(a\) | Coefficient of A | - |
| \(b\) | Coefficient of B | - |
| \(\text{limiting}\) | Limiting reactant (1 = A, 2 = B, 0 = exact ratio) | - |
| \(\xi_{max}\) | Maximum extent | mol |
| \(E\) | Excess of the other reactant | - |
| \(n_{left}\) | Excess reactant left at full conversion | mol |
Method and standards
Stoichiometry.
Where it is used
- Reactor feed checks.
- Examinations.
Common mistakes
- Comparing moles without dividing by coefficients.
- Masses instead of moles.
Assumptions and limits
- Single reaction.
References
- Stoichiometry: extent ξ = n_i/ν_i
- limiting reactant has the smaller ratio; excess = (fed − needed)/needed
Questions and answers
100 kmol N₂ with 400 kmol H₂ for N₂ + 3H₂?
N₂ limits; hydrogen is in 33 % excess, 100 kmol left at full conversion.
Excess air in combustion?
The same idea, with oxygen as the excess reactant.
Equal ratios?
The feed is exactly stoichiometric: no excess.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.