Worked example
Example: Ammonia synthesis to 700 K. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Standard Gibbs energy of reaction at T₁ | -32.900 kJ/mol |
| Temperature of ΔG° | 25.000 °C |
| Standard heat of reaction | -92.200 kJ/mol |
| Temperature of interest | 426.85 °C |
Applying the formula below gives:
| Result | Value |
|---|---|
| Equilibrium constant at T₁ | 580,538 |
| Equilibrium constant at T₂ | 3.0974e-04 |
| ln K₂ | -8.0798 |
Open this example in the calculator and change any input.
Formula
\(K_1 = e^{-\Delta G^\circ/RT_1}, \quad \ln\frac{K_2}{K_1} = -\frac{\Delta H^\circ}{R}\left(\frac{1}{T_2} - \frac{1}{T_1}\right)\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\Delta G^\circ\) | Standard Gibbs energy of reaction at T₁ | J/mol |
| \(T_1\) | Temperature of ΔG° | K |
| \(\Delta H^\circ\) | Standard heat of reaction | J/mol |
| \(T_2\) | Temperature of interest | K |
| \(K_1\) | Equilibrium constant at T₁ | - |
| \(K_2\) | Equilibrium constant at T₂ | - |
| \(\ln K_2\) | ln K₂ | - |
Method and standards
Thermodynamics.
Where it is used
- Reactor equilibrium checks.
- Examinations.
Common mistakes
- kJ vs J.
- ΔG at the wrong temperature.
Assumptions and limits
- Constant ΔH°.
References
- K = exp(−ΔG°/RT); van 't Hoff ln(K₂/K₁) = −(ΔH°/R)(1/T₂ − 1/T₁)
Questions and answers
Ammonia synthesis (N₂ + 3H₂ ⇌ 2NH₃), K at 700 K?
Falls from about 5.8 × 10⁵ at 25 °C to about 3 × 10⁻⁴: high temperature hurts equilibrium.
Why use high temperature then?
For rate; pressure and recycle make up for the equilibrium.
Exothermic or endothermic?
Exothermic K falls with temperature, endothermic K rises.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.