FireCADCalc

Damköhler Number and Conversion in CSTR and PFR

Damköhler number and conversion in an ideal CSTR and plug-flow reactor for first- or second-order kinetics, from rate constant and residence time.

Distillery and ethanolRefinery and petrochemicalChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: First order k 0.002 /s, 30 minSecond order k 0.0005, C0 2, 1 h

Results

Isothermal, constant density, ideal mixing or plug flow. Da below 0.1 gives under 10 % conversion; above 10, over 90 %.

Damköhler number3.6000
Conversion, CSTR59.385%
Conversion, PFR78.261%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: First order k 0.002 /s, 30 min. The inputs, in the units selected above:

InputValue
Reaction orderFirst order
Rate constant (1/s, or m³/(kmol·s) for second order)0.002000 -
Residence time30.000 min
Feed concentration (kmol/m³)1.0000 -

Applying the formula below gives:

ResultValue
Damköhler number3.6000
Conversion, CSTR78.261 %
Conversion, PFR97.268 %

Open this example in the calculator and change any input.

Formula

First order:

\(Da = k\tau, \quad X_{CSTR} = \frac{Da}{1 + Da}, \quad X_{PFR} = 1 - e^{-Da}\)

Second order:

\(Da = kC_{A0}\tau, \quad X_{CSTR} = 1 - \frac{\sqrt{1 + 4Da} - 1}{2Da}, \quad X_{PFR} = \frac{Da}{1 + Da}\)

Variables

Symbol Meaning SI unit
\(n\) Reaction order -
\(k\) Rate constant (1/s, or m³/(kmol·s) for second order) -
\(\tau\) Residence time s
\(C_{A0}\) Feed concentration (kmol/m³) -
\(Da\) Damköhler number -
\(X_{CSTR}\) Conversion, CSTR -
\(X_{PFR}\) Conversion, PFR -

Method and standards

Ideal reactor design equations.

Where it is used

  • Comparing reactor types.
  • Quick conversion estimates.

Common mistakes

  • Using it for non-isothermal reactors.
  • Units of k for second order.

Assumptions and limits

  • Constant density; isothermal.
  • k and C_A0 are entered as plain numbers in SI: k in 1/s (first order) or m³/(kmol·s) (second order), C_A0 in kmol/m³, whatever unit the residence time is shown in.

References

  • Levenspiel
  • Chemical Reaction Engineering
  • 3rd ed. (Wiley, 1999)
  • ch. 5 (ideal reactors)
  • Fogler
  • ch. 4

Questions and answers

Why does a PFR convert more than a CSTR?

A CSTR runs entirely at the low outlet concentration; a PFR sees high concentration at the inlet, so for positive orders it reacts faster on average.

What is the Damköhler number?

Reaction rate times residence time divided by concentration: how many 'reaction time constants' the fluid spends in the reactor.

What do the defaults represent?

A first-order reaction with k = 0.002 /s and 30 minutes of residence.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.