Worked example
Example: First order k 0.002 /s, 30 min. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Reaction order | First order |
| Rate constant (1/s, or m³/(kmol·s) for second order) | 0.002000 - |
| Residence time | 30.000 min |
| Feed concentration (kmol/m³) | 1.0000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Damköhler number | 3.6000 |
| Conversion, CSTR | 78.261 % |
| Conversion, PFR | 97.268 % |
Open this example in the calculator and change any input.
Formula
First order:
\(Da = k\tau, \quad X_{CSTR} = \frac{Da}{1 + Da}, \quad X_{PFR} = 1 - e^{-Da}\)
Second order:
\(Da = kC_{A0}\tau, \quad X_{CSTR} = 1 - \frac{\sqrt{1 + 4Da} - 1}{2Da}, \quad X_{PFR} = \frac{Da}{1 + Da}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(n\) | Reaction order | - |
| \(k\) | Rate constant (1/s, or m³/(kmol·s) for second order) | - |
| \(\tau\) | Residence time | s |
| \(C_{A0}\) | Feed concentration (kmol/m³) | - |
| \(Da\) | Damköhler number | - |
| \(X_{CSTR}\) | Conversion, CSTR | - |
| \(X_{PFR}\) | Conversion, PFR | - |
Method and standards
Ideal reactor design equations.
Where it is used
- Comparing reactor types.
- Quick conversion estimates.
Common mistakes
- Using it for non-isothermal reactors.
- Units of k for second order.
Assumptions and limits
- Constant density; isothermal.
- k and C_A0 are entered as plain numbers in SI: k in 1/s (first order) or m³/(kmol·s) (second order), C_A0 in kmol/m³, whatever unit the residence time is shown in.
References
- Levenspiel
- Chemical Reaction Engineering
- 3rd ed. (Wiley, 1999)
- ch. 5 (ideal reactors)
- Fogler
- ch. 4
Questions and answers
Why does a PFR convert more than a CSTR?
A CSTR runs entirely at the low outlet concentration; a PFR sees high concentration at the inlet, so for positive orders it reacts faster on average.
What is the Damköhler number?
Reaction rate times residence time divided by concentration: how many 'reaction time constants' the fluid spends in the reactor.
What do the defaults represent?
A first-order reaction with k = 0.002 /s and 30 minutes of residence.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.