FireCADCalc

CSTRs in Series: Conversion for a First-Order Reaction

Conversion of a first-order reaction in N equal stirred tanks in series for a total residence time, compared with one CSTR and a plug flow reactor.

Refinery and petrochemicalChemical and fertiliser

Inputs

Examples: Three tanks, k tau = 3Ten tanksOne tank

Results

Conversion with N tanks92.746%
One tank of the same total volume75.000%
Plug flow reactor95.021%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Three tanks, k tau = 3. The inputs, in the units selected above:

InputValue
First-order rate constant0.10000 1/min
Total residence time30.000 min
Number of equal tanks3.0000 -

Applying the formula below gives:

ResultValue
Conversion with N tanks87.500 %
One tank of the same total volume75.000 %
Plug flow reactor95.021 %

Open this example in the calculator and change any input.

Formula

\(X_N = 1 - \left(1 + \frac{k\tau}{N}\right)^{-N}\)

Variables

Symbol Meaning SI unit
\(k\) First-order rate constant 1/s
\(\tau\) Total residence time s
\(N\) Number of equal tanks -
\(X_N\) Conversion with N tanks -
\(X_1\) One tank of the same total volume -
\(X_{PFR}\) Plug flow reactor -

Method and standards

Tanks-in-series.

Where it is used

  • Effluent neutralisation and reactor cascades.
  • Choosing tank numbers.

Common mistakes

  • Using each tank's τ as the total.
  • Unequal tanks in the formula.

Assumptions and limits

  • Equal tanks, first order.

References

  • Tanks-in-series
  • first order: X = 1 − (1 + kτ/N)^(−N) (Levenspiel)

Questions and answers

k 0.1 /min, 30 min, three tanks?

0.875 against 0.75 for one tank and 0.950 plug flow.

Why do more tanks help?

Each runs at a higher concentration than one big tank.

Neutralisation cascades?

The same reasoning sets how many stages are worth it.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.