Worked example
Example: Three tanks, k tau = 3. The inputs, in the units selected above:
| Input | Value |
|---|---|
| First-order rate constant | 0.10000 1/min |
| Total residence time | 30.000 min |
| Number of equal tanks | 3.0000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Conversion with N tanks | 87.500 % |
| One tank of the same total volume | 75.000 % |
| Plug flow reactor | 95.021 % |
Open this example in the calculator and change any input.
Formula
\(X_N = 1 - \left(1 + \frac{k\tau}{N}\right)^{-N}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(k\) | First-order rate constant | 1/s |
| \(\tau\) | Total residence time | s |
| \(N\) | Number of equal tanks | - |
| \(X_N\) | Conversion with N tanks | - |
| \(X_1\) | One tank of the same total volume | - |
| \(X_{PFR}\) | Plug flow reactor | - |
Method and standards
Tanks-in-series.
Where it is used
- Effluent neutralisation and reactor cascades.
- Choosing tank numbers.
Common mistakes
- Using each tank's τ as the total.
- Unequal tanks in the formula.
Assumptions and limits
- Equal tanks, first order.
References
- Tanks-in-series
- first order: X = 1 − (1 + kτ/N)^(−N) (Levenspiel)
Questions and answers
k 0.1 /min, 30 min, three tanks?
0.875 against 0.75 for one tank and 0.950 plug flow.
Why do more tanks help?
Each runs at a higher concentration than one big tank.
Neutralisation cascades?
The same reasoning sets how many stages are worth it.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.