Worked example
Example: 50 mPa·s liquid, just turbulent (Re 15 120). The inputs, in the units selected above:
| Input | Value |
|---|---|
| Impeller diameter | 0.60000 m |
| Speed | 120.00 rpm |
| Liquid density | 1,050.0 kg/m³ |
| Liquid viscosity | 0.050000 Pa·s |
Applying the formula below gives:
| Result | Value |
|---|---|
| Impeller Reynolds number ρND²/μ | 15,120 |
| Tip speed πND | 3.7699 m/s |
| Froude number N²D/g | 0.24473 |
| Regime (1 laminar, 2 transitional, 3 turbulent) | 3.0000 |
Open this example in the calculator and change any input.
Formula
\(Re = \frac{\rho N D^2}{\mu}, \quad v_t = \pi N D, \quad Fr = \frac{N^2 D}{g}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(D\) | Impeller diameter | m |
| \(N\) | Speed | 1/s |
| \(\rho\) | Liquid density | kg/m³ |
| \(\mu\) | Liquid viscosity | Pa·s |
| \(Re\) | Impeller Reynolds number ρND²/μ | - |
| \(v_t\) | Tip speed πND | m/s |
| \(Fr\) | Froude number N²D/g | - |
| \(\text{regime}\) | Regime (1 laminar, 2 transitional, 3 turbulent) | - |
Method and standards
Definitions.
Where it is used
- Agitator selection and checks.
- Lime and chemical preparation tanks.
Common mistakes
- rpm not converted to rev/s.
- Tank diameter for impeller diameter.
Assumptions and limits
- Newtonian liquid.
References
- Impeller Reynolds number Re = ρND²/μ (McCabe, Smith and Harriott; Paul, Atiemo-Obeng and Kresta)
Questions and answers
600 mm impeller at 120 rpm in 50 mPa·s liquid?
Re 15,120, just above the 10⁴ turbulent band used here (close to transitional in practice); tip speed 3.77 m/s.
Why does regime matter?
The power number is constant only in the turbulent range.
Tip speed?
A guide to shear and blending intensity.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.