Worked example
Example: Ethanol in water, 25 °C. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Temperature | 25.000 °C |
| Solvent viscosity | 0.89000 cP |
| Solvent molar mass | 18.015 kg/kmol |
| Solute molar volume at its normal boiling point | 59.200 cm³/mol |
| Association factor of the solvent | Water (2.26) |
Applying the formula below gives:
| Result | Value |
|---|---|
| Diffusion coefficient at infinite dilution | 1.3670e-05 cm²/s |
Open this example in the calculator and change any input.
Formula
\(D_{AB}^\circ = \frac{7.4\times10^{-8}(\phi_BM_B)^{1/2}T}{\mu_BV_A^{0.6}}\ \ (\mathrm{cm^2/s};\ \mu\ \mathrm{cP},\ V_A\ \mathrm{cm^3/mol})\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(T\) | Temperature | K |
| \(\mu_B\) | Solvent viscosity | Pa·s |
| \(M_B\) | Solvent molar mass | kg/kmol |
| \(V_A\) | Solute molar volume at its normal boiling point | m³/mol |
| \(\phi_B\) | Association factor of the solvent | - |
| \(D_{AB}^\circ\) | Diffusion coefficient at infinite dilution | m²/s |
Method and standards
Wilke–Chang correlation.
Where it is used
- Liquid mass transfer and reaction rate estimates.
Common mistakes
- Using for concentrated solutions.
- Viscosity in Pa·s instead of cP (the calculator converts).
Assumptions and limits
- Dilute solute; nonelectrolytes.
- The water association factor is Perry's 2.26; the original Wilke–Chang value 2.6 gives a diffusivity about 7 % higher.
References
- Perry's Chemical Engineers' Handbook
- 9th ed. (McGraw-Hill, 2019)
- sec. 5
- Eq. (5-214) and association factors (water 2.26, methanol 1.9, ethanol 1.5, propanol 1.2)
Questions and answers
What is the association factor?
A correction for hydrogen bonding in the solvent: 2.26 for water in Perry's reanalysis.
Which molar volume?
The solute's molar volume as liquid at its normal boiling point (Le Bas volumes are often used).
What do the defaults give?
Ethanol (59.2 cm³/mol) in water at 25 °C: about 1.4 × 10⁻⁵ cm²/s (measured 1.24).
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.