Worked example
Example: 62 °C for 10 min. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Beer temperature | 62.000 °C |
| Time at temperature | 10.000 min |
| Target pasteurisation units | 15.000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| PU per minute at T | 1.9404 |
| Pasteurisation units delivered | 19.404 |
| Time for the target | 7.7302 min |
Open this example in the calculator and change any input.
Formula
\(\frac{PU}{min} = 1.393^{(T - 60)}, \quad PU = t\cdot1.393^{(T - 60)}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(T\) | Beer temperature | K |
| \(t\) | Time at temperature | s |
| \(PU^*\) | Target pasteurisation units | - |
| \(PU/min\) | PU per minute at T | - |
| \(PU\) | Pasteurisation units delivered | - |
| \(t^*\) | Time for the target | s |
Method and standards
Brewing PU definition.
Where it is used
- Pasteuriser setting and audits.
Common mistakes
- Using the tunnel spray temperature instead of the beer temperature.
- Over-pasteurising (flavour damage).
Assumptions and limits
- Constant beer temperature.
References
- Brewing pasteurisation unit: PU = t(min) × 1.393^(T − 60 °C) (Del Vecchio et al., 1951)
Questions and answers
What is a PU?
One minute at 60 °C; each degree above multiplies the rate by 1.393.
Why 1.393?
It corresponds to a z-value of about 6.94 °C for beer spoilage organisms.
How many PU are needed?
Typically 15–25 for lager; more for low-alcohol and high-sugar beers.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.