Worked example
Example: 10 t grist, 3:1, mash at 65 °C. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Grist | 10,000 kg |
| Strike water | 30,000 kg |
| Grist temperature | 18.000 °C |
| Target mash temperature | 65.000 °C |
| Grist specific heat | 1.6500 kJ/(kg·K) |
| Allowance for vessel heat loss | 1.0000 K |
Applying the formula below gives:
| Result | Value |
|---|---|
| Strike water temperature | 72.174 °C |
| Liquor-to-grist ratio | 3.0000 kg/kg |
Open this example in the calculator and change any input.
Formula
\(T_s = T_m + \frac{M_gc_g(T_m - T_g)}{M_wc_w} + \Delta T_l\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(M_g\) | Grist | kg |
| \(M_w\) | Strike water | kg |
| \(T_g\) | Grist temperature | K |
| \(T_m\) | Target mash temperature | K |
| \(c_g\) | Grist specific heat | J/(kg·K) |
| \(\Delta T_l\) | Allowance for vessel heat loss | K |
| \(T_s\) | Strike water temperature | K |
| \(M_w/M_g\) | Liquor-to-grist ratio | kg/kg |
| \(c_w\) | Specific heat of water, 4.1868 kJ/(kg·K) | J/(kg·K) |
Method and standards
Mixing heat balance.
Where it is used
- Brewing and distillery mashing.
Common mistakes
- Ignoring vessel heat-up.
- Using volume without density.
Assumptions and limits
- No water absorption heat. c_w, the specific heat of water, is 4.1868 kJ/(kg·K).
- Strike water at or above 100 °C (at atmospheric pressure) is rejected.
References
- Definitions and mass and energy balances: heat balance of grist and water to the mash temperature
Questions and answers
Why is strike water hotter than the mash?
The cold grist absorbs heat as it mixes.
What liquor-to-grist ratio is usual?
2.5–4 L/kg for infusion and decoction mashes.
What grist specific heat?
About 1.6–1.7 kJ/(kg·K) for dry malt.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.