Worked example
Example: Ganapathy: 20/30/15/20 %. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Al₂O₃ | 20.000 % |
| SiO₂ + TiO₂ | 30.000 % |
| CaO + MgO | 15.000 % |
| Fe₂O₃ + Na₂O + K₂O | 20.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Estimated ash melting temperature (indicative, not a specific ASTM point) | 1,100.0 °C |
Open this example in the calculator and change any input.
Formula
\(t_m = 19\,Al_2O_3 + 15\,(SiO_2 + TiO_2) + 10\,(CaO + MgO) + 6\,(Fe_2O_3 + Na_2O + K_2O) \ \ (°C,\ \%)\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(Al_2O_3\) | Al₂O₃ | - |
| \(SiO_2 + TiO_2\) | SiO₂ + TiO₂ | - |
| \(CaO + MgO\) | CaO + MgO | - |
| \(Fe_2O_3 + Na_2O + K_2O\) | Fe₂O₃ + Na₂O + K₂O | - |
| \(t_m\) | Estimated ash fusion temperature | K |
Method and standards
Ganapathy's Eq. (13).
Where it is used
- Screening coals for slagging.
- Comparing coal blends.
Common mistakes
- Treating it as the ASTM initial deformation temperature.
Assumptions and limits
- Oxides in % of ash; coal ashes. Results outside about 1000–1600 °C, as for a single pure oxide, are flagged as unreliable.
- The source gives one "ash melting" temperature; it is not tied to the deformation, softening, hemispherical or flow temperature of ASTM D1857 or ISO 540, nor to a reducing or oxidising atmosphere. Use it to rank coals, not for design.
- The listed oxides should make up nearly all the ash: a sum above 100 % is rejected and a sum below 90 % gives a warning.
References
- Ganapathy
- Steam Plant Calculations Manual
- 2nd ed. (Marcel Dekker, 1993)
- Q2.17
- Eq. (13)
Questions and answers
Why does ash fusion matter?
Low-melting ash slags furnace walls and superheaters, raising furnace exit temperature.
Which oxides raise it?
Alumina and silica; fluxes such as iron, calcium and alkalis lower it.
What does Ganapathy's example give?
20 % Al₂O₃, 30 % SiO₂ + TiO₂, 15 % CaO + MgO, 20 % Fe₂O₃ + Na₂O + K₂O gives 1,100 °C.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.