Worked example
Example: 14 % fibre, 48 % moisture. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Crushing rate | 100.00 t/h |
| Fibre % cane | 14.000 % |
| Bagasse moisture | 48.000 % |
| Dissolved solids % bagasse | 3.0000 % |
| Bulk density stacked | 200.00 kg/m³ |
| Bulk density loose | 120.00 kg/m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Fibre % bagasse | 49.000 % |
| Bagasse per tonne cane | 285.71 kg/t |
| Bagasse | 28.571 t/h |
| Volume stacked | 142.86 m³/h |
| Volume loose (conveyors) | 238.10 m³/h |
Open this example in the calculator and change any input.
Formula
\(f' = 1 - w - D, \quad B = \frac{f}{f'}, \quad \dot m_B = A B, \quad \dot V = \frac{\dot m_B}{\rho}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(A\) | Crushing rate | kg/s |
| \(f\) | Fibre % cane | - |
| \(w\) | Bagasse moisture | - |
| \(D\) | Dissolved solids % bagasse | - |
| \(\rho_s\) | Bulk density stacked | kg/m³ |
| \(\rho_l\) | Bulk density loose | kg/m³ |
| \(f'\) | Fibre % bagasse | - |
| \(B\) | Bagasse per tonne cane | kg/kg |
| \(\dot m_B\) | Bagasse | kg/s |
| \(\dot V_s\) | Volume stacked | m³/s |
| \(\dot V_l\) | Volume loose (conveyors) | m³/s |
Method and standards
Hugot's fibre balance.
Where it is used
- Boiler fuel planning.
- Bagasse handling design.
Common mistakes
- Using fibre % cane for fibre % bagasse.
- Forgetting dissolved solids.
Assumptions and limits
- Constant fibre through the mills.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 41
- bagasse
- eqns 41.9–41.11 and bulk densities
- pp. 909–912
Questions and answers
Why from fibre?
Fibre passes the mills unchanged, so bagasse is the fibre divided by its share in the bagasse.
Typical figures?
Hugot: about 275 kg of bagasse per tonne cane at 48 % moisture.
Which density?
Stacked about 200 kg/m³, loose on conveyors about 120 kg/m³.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.