FireCADCalc

Bagasse per Tonne Cane and Its Volume (Hugot)

Bagasse made per tonne cane from fibre, moisture and dissolved solids (Hugot eqns 41.9–41.11), hourly bagasse and its volume stacked and loose.

Sugar mill and cogenerationBoiler

Inputs

Examples: 14 % fibre, 48 % moistureHigh fibre

Hugot: 2–4 %.

Results

Hugot: fibre % bagasse 46–53 %, bagasse 24–30 % of cane (about 275 kg/t). Stacked bagasse 160–240 kg/m³, loose 80–120 kg/m³.

Fibre % bagasse49.000%
Bagasse per tonne cane285.71kg/t
Bagasse28.571t/h
Volume stacked142.86m³/h
Volume loose (conveyors)238.10m³/h

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 14 % fibre, 48 % moisture. The inputs, in the units selected above:

InputValue
Crushing rate100.00 t/h
Fibre % cane14.000 %
Bagasse moisture48.000 %
Dissolved solids % bagasse3.0000 %
Bulk density stacked200.00 kg/m³
Bulk density loose120.00 kg/m³

Applying the formula below gives:

ResultValue
Fibre % bagasse49.000 %
Bagasse per tonne cane285.71 kg/t
Bagasse28.571 t/h
Volume stacked142.86 m³/h
Volume loose (conveyors)238.10 m³/h

Open this example in the calculator and change any input.

Formula

\(f' = 1 - w - D, \quad B = \frac{f}{f'}, \quad \dot m_B = A B, \quad \dot V = \frac{\dot m_B}{\rho}\)

Variables

Symbol Meaning SI unit
\(A\) Crushing rate kg/s
\(f\) Fibre % cane -
\(w\) Bagasse moisture -
\(D\) Dissolved solids % bagasse -
\(\rho_s\) Bulk density stacked kg/m³
\(\rho_l\) Bulk density loose kg/m³
\(f'\) Fibre % bagasse -
\(B\) Bagasse per tonne cane kg/kg
\(\dot m_B\) Bagasse kg/s
\(\dot V_s\) Volume stacked m³/s
\(\dot V_l\) Volume loose (conveyors) m³/s

Method and standards

Hugot's fibre balance.

Where it is used

  • Boiler fuel planning.
  • Bagasse handling design.

Common mistakes

  • Using fibre % cane for fibre % bagasse.
  • Forgetting dissolved solids.

Assumptions and limits

  • Constant fibre through the mills.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 41
  • bagasse
  • eqns 41.9–41.11 and bulk densities
  • pp. 909–912

Questions and answers

Why from fibre?

Fibre passes the mills unchanged, so bagasse is the fibre divided by its share in the bagasse.

Typical figures?

Hugot: about 275 kg of bagasse per tonne cane at 48 % moisture.

Which density?

Stacked about 200 kg/m³, loose on conveyors about 120 kg/m³.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.