FireCADCalc

Spent Wash Concentration by Multiple-Effect Evaporation

Concentrate and water evaporated when spent wash is concentrated to a target solids, and the steam at a given evaporator steam economy.

Distillery and ethanol

Inputs

Examples: 12 to 55 %Grain thin stillage

Results

The evaporator condensate is reused after polishing; scaling limits the final solids.

Concentrate226.91t/d
Water evaporated813.09t/d
Steam7.5286t/h

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 12 to 55 %. The inputs, in the units selected above:

InputValue
Spent wash1,040.0 t/d
Solids in spent wash12.000 %
Solids in concentrate55.000 %
Steam economy (kg water per kg steam)4.5000 -

Applying the formula below gives:

ResultValue
Concentrate226.91 t/d
Water evaporated813.09 t/d
Steam7.5286 t/h

Open this example in the calculator and change any input.

Formula

\(\dot m_c = \dot m \frac{x_1}{x_2}, \quad \dot m_v = \dot m - \dot m_c, \quad \dot m_s = \frac{\dot m_v}{E}\)

Variables

Symbol Meaning SI unit
\(\dot m\) Spent wash kg/s
\(x_1\) Solids in spent wash -
\(x_2\) Solids in concentrate -
\(E\) Steam economy (kg water per kg steam) -
\(\dot m_c\) Concentrate kg/s
\(\dot m_v\) Water evaporated kg/s
\(\dot m_s\) Steam kg/s

Method and standards

Solids balance.

Where it is used

  • ZLD and incineration boiler planning.

Common mistakes

  • Concentration by volume used as mass.

Assumptions and limits

  • No solids carry-over.

References

  • Solids balance; steam = evaporation / economy

Questions and answers

Why concentrate spent wash?

To burn it in an incineration boiler or dry it, and to recover water for ZLD.

What steam economy?

About 4–5 for a five-effect plant; an MVR stage reduces live steam much further.

Limit on solids?

Viscosity and scaling, typically 55–60 % for firing.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.