FireCADCalc

Molasses Storage Tank and Storage Loss

Tank volume for final molasses from production, storage days, density and entrained air (Hugot ch. 38), and the fermentable sugar lost in storage at a temperature.

Sugar mill and cogenerationDistillery and ethanolTank and drum

Inputs

Examples: 100 t/d for 120 days at 35 °CHot tank 42 °C

Hugot: 10 % for light, 15 % for heavy molasses.
Hugot (Meade): 2–3 % per year.

Results

Hugot: the loss roughly quadruples for each 10 °C above 30–35 °C. The rule is a rough guide near that range; far from it the loss is an extrapolation.

Above 40 °C molasses has decomposed explosively in storage tanks: keep it cooler.

Molasses stored5,400.0t
Bulk density with air1,215.5kg/m³
Tank volume4,936.2m³
Fermentable loss per year at that temperature9.3303%
Loss over the storage period2.3006%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 100 t/d for 120 days at 35 °C. The inputs, in the units selected above:

InputValue
Molasses made100.00 t/d
Days of storage120.00 d
True density of molasses1,450.0 kg/m³
Entrained air by volume10.000 %
Free board and dead volume10.000 %
Storage temperature35.000 °C
Fermentable loss per year at 30–35 °C2.5000 %

Applying the formula below gives:

ResultValue
Molasses stored12,000 t
Bulk density with air1,305.0 kg/m³
Tank volume10,217 m³
Fermentable loss per year at that temperature3.5355 %
Loss over the storage period1.1624 %

Open this example in the calculator and change any input.

Formula

\(M = \dot m t, \quad \rho_a = \rho(1 - a), \quad V = \frac{M}{\rho_a(1 - \ell)}, \quad L = L_0\,4^{(T - 32.5)/10}, \quad L_s = L\frac{t}{365\ \mathrm{d}}\)

Variables

Symbol Meaning SI unit
\(\dot m\) Molasses made kg/s
\(t\) Days of storage s
\(\rho\) True density of molasses kg/m³
\(a\) Entrained air by volume -
\(\ell\) Free board and dead volume -
\(T\) Storage temperature K
\(L_0\) Fermentable loss per year at 30–35 °C -
\(M\) Molasses stored kg
\(\rho_a\) Bulk density with air kg/m³
\(V\) Tank volume m³
\(L\) Fermentable loss per year at that temperature -
\(L_s\) Loss over the storage period -

Method and standards

Mass balance and Hugot's storage-loss rule.

Where it is used

  • Molasses tank farms.
  • Distillery feedstock planning.

Common mistakes

  • Using true density for tank volume.
  • Storing hot molasses.

Assumptions and limits

  • Loss rule centred on 32.5 °C; Hugot gives no range for it, so far from 30–35 °C it is an extrapolation. Losses above 100 % are capped and flagged.
  • The storage loss assumes all the molasses is held for the whole period, and the tank holds the full production of the period at once with no deduction for the loss.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 38
  • density and storage of molasses
  • pp. 836–837

Questions and answers

Why allow for air?

Molasses holds fine bubbles from the centrifugals and pumping: 10–15 % of the volume.

Why does temperature matter so much?

Sugar losses roughly quadruple per 10 °C; above 40 °C molasses can foam and decompose violently.

Weigh or measure?

Hugot insists on weighing: volume is uncertain because of the air.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.