Worked example
Example: 250 TCH carrier. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Crushing rate | 250.00 t/h |
| Carrier width | 2.1000 m |
| Cane bed height | 1.0000 m |
| Cane bulk density on the carrier | 180.00 kg/m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Carrier speed | 11.023 m/min |
| Cane load per metre of carrier | 378.00 kg/m |
Open this example in the calculator and change any input.
Formula
\(v = \frac{C}{\rho_b W H}, \quad q_L = \rho_b W H = \frac{C}{v}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(C\) | Crushing rate | kg/s |
| \(W\) | Carrier width | m |
| \(H\) | Cane bed height | m |
| \(\rho_b\) | Cane bulk density on the carrier | kg/m³ |
| \(v\) | Carrier speed | m/s |
| \(q_L\) | Cane load per metre of carrier | kg/m |
Method and standards
Continuity.
Where it is used
- Cane handling design.
- Feed control setting.
Common mistakes
- Prepared-cane density for whole cane.
Assumptions and limits
- Uniform bed.
References
- Continuity v = ṁ/(ρ W H); bulk density by measurement
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (1986)
- ch. 2
- eqns 2.3–2.8 and bulk densities
- pp. 22–26
Questions and answers
Bulk density of cane?
Whole stalk cane on a carrier is roughly 150–250 kg/m³; prepared cane is denser.
Why a steady bed?
Even feeding keeps the mills loaded and extraction steady.
Kicker and leveller?
They set the bed height this calculation assumes.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.